Search results

Agreed. Put cable from under thumb screew on back of clock to any original black cable which should be the earth, or bolt it to the body somewhere.

Yes it is but I think it has it's history in the mod designs? Maybe something to do with maintaining night vision for people in the back. But like busttet said it changed on the 200tdi and beyond.

Sounds like a fuel supply problem to me, but could be other problems. When you start it up before it fires do all four cylinders sound the same as the compress or does one (or more sound as if there compressing faster than the others) as this is a sign of loss of compression in one or more...

Don't buy BritPart !

Scrap yard? Where in the country are you?

Anything will fit if you want it to........

If I put my 14,500W JBL concert system in the back i'm sure you would be able to hear it over the radio :D Depends what sort of radio/amp you have etc. Simple answer is yes you could upgrade the system so you can hear it over the engine, but its going to cost more than a cheep pair of...

There are also a lot more 90s with out numerous rusty holes in the metal work than discos!

Can you get a meter out and check the voltage between the body work, and BOTH sides of the fuse holder. One should be 12volts+, and the other should be 0. next thing I need you to do is remove the switch for the interior light/dash light change over, and pull the plug off the back, and see if...

Welcome to landy zone. This is one of the most commonly asked questions on he forum, and I doubt anybody will want to retype it out yet again. Just do a search ..... Basicly it's slightly more complicated than a TD diesel to 200tdi diesel swap but I'm sure you will find what you want to know

An interesting problem, but like all electrical problems a simple bit of logic will soon find the fault. I tend to agree with everybody above, but the blowing of all the fuese puzzles me a bit as well, as for this to occure you must have a dead short (or a large amount of current being drawn...

Buacka.... Jungle is massive............

Also when it did start making the noises was it related to the landy moving, or the engine revs / did it stop when you put the main box into N?

Mine did this - is 2 mils up the side of a rather muddy hill in the lakes in 2008. The center bearing in the trasfer box went, causing it to keep jumping out of gear. Eventualy after the bearing has disintigrated itsself, and smashed the speedo spindle to bits and shreaded the selector into a...

Or its had a defender manifold bolted on! But its going to be bworth more as theres not many around (as engines on there own) compaired to disco ones - because the discos are falling appart

You can have problems. Most car parks are set to around 6ft. I can get into a local one set at 1.96 Meters. In theory they should set the height at the enterance to tak into account any angles you may encouter in there. My advice would be to mearure the height of your landy rover first (as...

Thats just another reason to put more photos of your new landy up one here :D

Well thanks guys - dont think it fell off as i had a good check of things only a weel ago, and all three bolts were in there then, and it was the metal bracket not just the rubber thats gone, and the holes look clean so i doubt it rusted either, and yes it was just one. The other ones comming...

Can we get a photo of the locking mechanism bit of the new lock (end on) and a bit on the door frame

If anybody gets offered a mud flap and the securing bracket to the rear x-member please let me know as some theiving bast*ard decided to un bolt my near side one last night... Mind you i think the rear looks better without them?