Search results

I've use a Mantec one, easy to fit and solid! I stand on mine to clean the roof.

I've got a td5 90 and it won't stay in low range while off roading, it stays in for a little bit but then it slips out and slides back in to neutral. Any fixes?

So I've got a td5 90, I'm looking at preparing the engine for wading. Where abouts in the engine bay do I need to make water tight? I know I need to seal the snorkel and airbox in but what about the engine itself?

Brill! I've bought a wading kit from Flatdog, so I just need to find out what size the pipes will be!

Did you use a wider pipe after the splitter? And how did you attach the pipe up your snorkel?

I've got a td5 90, what route have people put their breather pipes through and then how have you attached them on to your snorkel?

I think the slave cylinder has recently been changed so I guess that means it could be the clutch master. As well as the back of the clutch pedal and top of the clutch pedal arm looks wet.

Replace the clutch master or brake master?

I've got a TD5 90 and sometimes, once or twice a month I get clutch/brake fluid dripping from my clutch pedal. Both the reservoirs don't seem to be going down. What could be the problem?

I've got. TD5 90 and the drivers side window motor has gone. Will one from a discovery 2 fit and work?

I've got a td5 90 on a 56 plate and the drivers side speaker isn't working! The passengers speaker works fine, I've tried the drivers side speaker on the passengers side and it works fine so it must be something to do with the wiring. I know nothing about the wiring, I've pulled the radio out...

Are they easy to fit? Bit of a novice!

Are they easy to fit?

What are people's opinions on front mud flaps on a defender? I've got a td5 90 and I can't decide whether to fit them or not?

Ive got a td5 90 with 16inch boost alloys. Currently on is 235/85/16, I would like a tyre that is a bit wider, what size will fit on the car without having any problems (ie rubbing on full lock) or without having to make any adjustments or modifications.

Thanks but that didn't really help!

What a helpful bit of advice!

Ive got a td5 90, I keep getting a draft coming through the heater controls on the right hand side, or at least around that area, as well as the vent that air flows through when the air vent is open! I've changed the vent seals but it's still coming through, any ideas?

It is about a 5mm gap!

I've got a td5 90, when I fitted a new door seal on the drivers side it has left a gap at the top. The passenger side is fine! Any ideas?