Search results

Hello Put no11 fuse in my p38 and transfer neutral appeared on display Took car of drive and lost all gears.. Took out fuse and tried again... Had all gears...is this right Thank you eddie

Hello when my freelander L diesel gets to tempature it starts to rev up on its own engine light comes on then car dies....it cant be throttle sensor as ive fitted 3. does an air leak sound the cause please help Eddie

still not much luck with a second hand unit...now i notice the hill decent light comes on so i think it could be a electrical problem to ecu thing is doing my head in Eddie

having a probllem with my throttle position sensor ive fitted a second hand one but problem still there with over reving if i had cleared the fault code first then fitted part would that solve problem as i now have a third sensor!!! 3rd time lucky..land rover want £520!!...any help please...i...

the engine management light comes on and losses power then is fine again.....but when i stop the revs climb to about 2000rpm...ive been told it could be carbon deposit build up around the butterfly in throttle body

thank you Eddie

when I come to a junction etc and take car out of gear the revs dont drop straight away....also when i change down the revs still are about 1200 to 1500rpm then when im at lights then then will fall to 900rpm any ideas

phew thx Allan i'll crack on with the 99 other problems now!!

my problem is when window right down and i use the switch to raise half way the window lowers itself I have to raise window all the way up then edge the switch to lower a quarter i have removed the fuses lately so not sure if i have upset the window switch mechanism any help would be great

replace window regulator

can anyone point me in the right direction of the correct relays for door and elec window motors thx once again

it says the psi in all four tyres should be 30 seem not alot as when i bought car they had 40 in them and felt better on the road anyone pumping up for road use i got the wranglers on mine

thanks but its defo the regulator got a haynes manual so hopefully it shows me in there looks a headache

ive got an issue with mine but when you use switch you hear somthing goin on but window wont budge ive bought a new regulator and want to know if i have to remove from door before i fit new cable looks a bit fiddly in there lol any info would help

thank you hippo,contacted rezpax to confirm tho

can anyone help me on location of the cabin filter as ive not a clue i have right filter but cant see it must buy a haynes manual lol

ahh the famous egr mod dose it work well...took maf sensor lead off any car no different in power so gunna do that first can i just get a new egr control valve or you recomend the blank is it a case of unscrewing and removing also i dont suppose you know where the cabin filter goes please...

yes spunka the green resistor block three spring type each speed on fan does a differnt spring im sure when block is in heater exclousure it cools each element

oh no just checked all the fuses and all correct ampage im led to believe tho when you insert green heater switch back in the fan cools it down! im gunna contact the people who supplied it and see if they can shed any light thank you

hi guys just had mine soldered mine today but when i went to test it the three springs all started glowing red hot at different speeds of fan switch,is this normal....does the elements cool down once the block is inserted back in its appiture and been cooled by air flow or is this normal....dont...