Search results

Ok. I have a 1987 D reg 90 truck cab. Would like a swop for a 110 csw. I have had it for about 3 years and in that time i have done the following :- New fuel tank last year Discovery 200tdi engine last year New brakes when i bought it ( front discs, pads, calipers, all brake lines, rear...

I put disco alloys on my 1987 90. Had to use 30mm spacers an fettle a bit on the wheel. If they dont sit right then you have problems

Its the canopy thats the big bit

Canopy is 32 inchs high, 4 foot long and 5 foot wide. Truck cab roof is 27 inches high, 3 foot front to back and 5 foot wide. At a guess i would say no to fitting in the van

Its common for the fuel tank to leak from the welded joint around the middle.

You just solved your own problem........... Build her a garage that will give you more room for toys

New wife?

Doesnt it need a live for the fuel cut off solenoid?

Engine out first. For the gear box, i had the landy on 4 axle stands and used 2 trolley jacks to lower the gear/transferbox. I had a piece of plywood on the floor which i lowered them on to which made it alot easier to slide them out from underneath. Only had to remove the access panel under the...

can i collect the items when it warms up. Bit too cold to travel right now

Real easy. The only awkward bit is the catch on the front slam panel. About 30 mins to an hour.

You sure got your moneys worth from them pads

For parts for the 90. Great engine

This story was in the paper the other day. Lookers vauxhall have given the women a 57 reg vectra to replace the 1 they had to cut the roof of

Not sure if it applies here reguards the oil filler cap. I had the 2.5td engine in my 1987 90. I gad the same issue. The reason was the piston rings were letting pressure past and pressurising the oil system. I replaced the engine

I re-used mine and never had any trouble. Been about 2 years

did ya get one?

£10.000. I will send you a cheque once i have the truck! on my drive :boink::boink:

Thanks johnny i think ill give that a go. I`ve spoke to the scrap metal place where i took the shell and she said just write a letter to dvla and see how that goes. But seen as it took them 7 months to send the logbook out in the first place i`d rather not.

It says to take it to an authorised treatment facility and they will do the rest. Problem is i stripped it myself and weighed in the body. There used to be a red section for scrapping but that has disappeared