Search results

Tis what I was thinking but thats a single pink wire :( No airbag so thats another one sorted :D

Thats two down then - many thanks :) I was thinking that about the looms as I have 4 plugs at the radio and only 2 are ISO so im guessing changer and the controls by the steering wheel. The hard part is it all came apart nearly 2 months ago with the intention of going back together in a week...

After all the welding and heather matrix replacement ive been putting all the dash back in however I cant work out where a few connectors go so was wondering if anyone knows ? Firstly this pair of space connectors. They seem to go in the centre console and the length puts them around the window...

Got the matrix on the metal hoses today - got those clips are an arse to get right :mad: Here is all the pipework I have on the engine :(

Cool Ill try and get a picture tomorrow for others or if I cant see where you mean :)

Well im changing the heater matrix on my Disco 1 300Tdi as the previous owner just bypassed it but the troube is I have no idea how the coolant pipes should run or where they should come from :confused: Ive got the matrix in along with the metal pipes that take the pipes through the bulkhead...

V8 Disco - Just my thinking :D traxx99 - must agree - top place :) Bit more welding progress :rolleyes: A nice crack had appeared by the seat mount so that got a nice line done on it Along with the wheel arch And all the passenger side sills So be finished on the welding so its...

Very true im afraid - you nenver know until you start digging ! Also I never knew they did paneled out rear windows :eek:

Tell me about it :( Must be a lot out there like it though - people just dont take everything off as they are scared whats might be under it or not lol

More progress has been made :) Basically the drivers sill was getting a tad soft in places and the scuttle tray had been filled with sealer so choppy choppy platey platey. By the time everything is refitted then it will all be hidden anyway :)

Long enough :doh: If you cant weld I wouldnt advise doing it yourself tbh. I can weld to an extent but didnt trust myself with the rear cross member so got a fabrication friend to do it. As for time it all comes down to how well you work / how much needs doingetc - you cant stick a figure on...

Thanks :) Id 100% reccomend the YRM one due to the fit and the cost. Also if you ring them up you can get nly the bits you need as I didnt need the 2 end pieces :D

Next attempt at pictures ! Rear is now finished unless anything else is found so on to the middle and front Its not too neat but most will be covered and its a bit of a work horse anyway

Body off ! Dont think ill ever be tacking it that far in ! The fact ive got my first seperate body car is enought - let alone seperating them :eek: Does make one hell of a difference to the general look of the vehicle even though its certainly no looker :( Thanks :)

So I got the cutter out and have gone for it - its being welded by Terry - a bloke I met via a local 4x4 club and to say he is helpful and sound is an understatement :cool: Cutty cutty grindy grindy Turns out rearcrossmember is shafted so new one from YRM - awesome service and the part is a...

Well I thought that id do a bit of a project thread on this seeing as its my first 4x4 I brought it and was not that well in the know and a tad over excited but thats all part of the fun of it Its a 300Tdi Discovery 1 on an M plate although im not sure what side of the crossover it is for...

Thanks - in it goes :)

Just wondering if they are allowed on here and if so where to put one ? Im doing one on my first ever 4x4 (Disco 1) and was just curious if I can put it all on here so that people see where the help they are giving me is going :)

Cheers chaps - YRM is the cheapest I can find so gonna haveto bite the bullet

Any idea on a part number ? Found a few different selections of rear members but would like to be sure :)