Search results

no problem mate its what we are all here for, the t seals are cheap and so i would recomend getting 2 sets of each as i seem to remember that when i fitted them i knew that one slip of the feeler guages and the t seal snagging would have meant another trip to get another set , for the price of...

hello mate , the slaves on both are technically on the passenger side, as your sitting in the driver seat , if the slave enters the bell housing down by your left foot on the right of the right of the gearbox cowling then you have a 2/2a if the slave is entering the bell housing on the far left...

hello mate , it depends on what colour you want them to be , the 74 i restored i done them done in sandstone you can get it from most paint suppliers the rims i had were also used so i got a wire cup brush on a drill and took off all the old paint, you can apply the sandstone by brush but be...

the bell housings are completely diffrerent on a s2 and a s3, on the series2 the linkage for the clutch is on the right and on a 3 the linkage apperture is on the left of the bell housing

OI, hat man, your not a shepherd by any chance? you seem to own an awful lot of sheep!

if the sump is off....which it may not be at this point:mooning:

hello mate , the only advice i can give is that i have just restored a 74 landy swb and i fitted avon traction milage they would have been standard at the time and they "look right" ,but a bit skinny on a swb rim but a nice tyre i believe a company called classic tyres have started making them...

dunsfold landrover sell genuine parts oil seal and t seals they will send them to you , got mine from there and had no probs with them at all and fitting looks harder than it is , i found it easy mate, i did mine with the engine in so you should find it easier, there are 2 types of t seal cork...

better idea, 2 bits of straight wood width of chassis on the ground front and back under chassis pack them underneath and make them absolutely level with spirit level then check as before ! if the chassis is bent (which i doubt) the different hight of each corner will show up when you measure...

thought of a way but how feasable it is i dont know, you need to borrow hire 2 highlift jacks, and you need a spirit level and some very level ground, measure the difference in the lean on the level ground, jack the landy up front and back but not so wheels are off of the ground just enough to...

hello mate , going on the last few posts from you whats right with your landy lol but sreiously a bloke i knew bought a series 2 a and his was leaning lower on drivers side , we changed all the springs and it was still not right, although they were s**tpart springs and they are c**p anyway but...

good point, stop splitting hairs! and making me look a ****lol

hi philly, welcome , i drive with mine off most of the time in the summer never had a pull yet, how do jim,

hello mate yeah im a plumber by trade and i work for an air con firm, i do the air con heating and coolin connections for them and we fit tea points toilets etc and i also specialised in leadwork in the past . our firm went quiet for a while and our boss priced some jobs very low to keep us all...

yep your right go with military ascosiation ..my mate done his through motor heritage and it cost just over £20.00 and all he got was a bit of paper telling him when it left production line .. was not worth the paper it was written on

well yes my original rag top was shagged but by a strange twist of feight last year, just stopped off at the garage at the billing show just about to get going and some bloke pulled up and asked if i wanted to buy one , knowing how much they are and having spent most of my money over the weekend...

hello mate how are you doing

im driving a series 3 109, with a rag top( pic is on profile) it was originally a 24 volt found in auto trader bloke had 20 of them , i was going to turn it down owing to parts availability but he converted to 12 and the deal was done , at first i was not sure whether i should have bought it but...

have to say e bay is very good my military lights were on the verge of falling out due to knackered adjusters and was finding it a pain trying to get a replacement but found some lucas ones on e bay werent sure if they would fit but bought them anyway and they were perfect just drilled out old...

sounds good matey mine is in a beige ring binder , do you think they are hard to come by ?