Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. JustinSA

    Un able to post pics

    I am unable to post pics it keeps telling me unsuported fill type
  2. JustinSA

    Exhaust Vibration

    Thanks will check it out uploaded a pic of my little car
  3. JustinSA

    Exhaust Vibration

    Thanks Singvogel I will have a look as sugested. No ice and no snow here just soft sand and heat current temp is 36 degrees C A/C working overtime :lol::lol: I had a Toyota Hilux Doublecab 1990 model 4x4 with the solid front axil so freelander is bliss
  4. JustinSA

    Still leaking diesel on top of engine

    Usually the steel pipes leak on the 320d's
  5. JustinSA

    Exhaust Vibration

    Hi Guys Another little niggle on the 1.8i that needs sorting the Exhaust is very buzzy at about 3600rpm and over gives vibration as well any ideas?
  6. JustinSA

    Single mass flywheel conversion

    On the BMW 320d wich is very close to your motor the crank pick up actually reads of a plate which bolts between the flywheel and the crank so I dont think you will have any issues from that angle
  7. JustinSA

    Do you regret buying a Freelander?

    I dont regret bying a freelander most modern cars give trouble regardliss of make!!
  8. JustinSA

    Rear Door Glass

    So removed rear door panel and found motor disconnected and cables removed from there mountings looks like regulator is faulty will have to replace. I plugged in motor and try a recalibration nayway which worked even though cables were just moving on there own. So at least I now have a working...
  9. JustinSA

    Noise from font end 1.8 5 door

    Thanks Freelaner for all your help:D !
  10. JustinSA

    Noise from font end 1.8 5 door

    Hi Thanks so much yes I am in South Africa I will check it out at work and Saturday Morning. Was yours the inner joint or outer?
  11. JustinSA

    Noise from font end 1.8 5 door

    Hi guys Any body had any problems like this CV type noise when doing sharp turns ( full lock) to right only. IRD seems fine no play at propshaft output flange and no other noises I have already replaced VCU with new original Landy part as I wanted peace of mind. Noise seems to becomming from...
  12. JustinSA

    Hi From SA

    Hi All My name is Justin from South Africa. I am the workshop manager at A BMW Mini Motorad Dealer In Port Elizabeth South Africa. I have had the pleasure of driving 3 Land Rovers as company cars before my own I had a Defender 90 2.8i and a Defender pick up TDi and a Freelander 1.8 5 door. My...
  13. JustinSA

    Rear Door Glass

    Thanks so much will have a look! And will update with findings
  14. JustinSA

    Rear Door Glass

    Hi Guys I am from South Africa and have just got a old Freelander 1 5 Door problem I have is the rear door class does not work so my wiper and demister dont work too.The glass does raze and lift a small amount when opening however when I disconnect the batt to recalibrate the glass does not...
Back
Top