Search results

i found this one on ebay Range Rover Discovery air flow meter sensor.ERR5595A on eBay (end time 24-Dec-09 09:19:01 GMT)

were did you buy your one from i been looking to buy a replacement one from ebay readiing around on the net alot of poeple say the one off ebay are **** you should buy the original sgem one i guess they wont be selling them if they didnt work

any one got one lying around or have broken a p38 recently

hi mate it will continue to run with it disconnected but you cant drive it as the engine shutters and stalls when you rev it too much in gear when driving you can rev it fully when its in one place parked i think its def the maf aswell would it be a good idea to buy a replacement one off...

mate how can I test the maf sensor to make sure it's ok I took my range to a mte who has a snap on diagnostic computer the only error his comp picked up was faulty maf which showd up 3 times can this cause starting Issues?

Hi mate I'm in Kent near bluewater do you know any 1 with a kit that can help near me thanks

Hi mate I didn't get a chance to I have had other issues with the range

hi mate its a multi point bigas system i have checked the pipes they seem ok il try and check the airbox to see if its not blocked

jus a update i can fully drive it if i start it by spraying carb cleaner in the air intake and switch over too lpg when i drive it on petrol i can only push the pedal down a little bit because more you press the pedal the more the engine starts to die as you back off the pedal the engine comes...

Hi mate last time I checked the rail the fuel was coming out fast If the throtte is open fully while trying to start with out the carb cleaner it doesn't want to start After starting it idles and drives normal on LPG only on petrol you have to keep the air intake disconnected from the air...

hi guys i got a range rover 4.6 p38 gems its currently not starting up i originally thought it was the fuel pump which i have swapped with a different and it still does the same i have checked when i turn the ignition on i can hear the fuel pump priming i have tried disconnecting...

RANGE ROVER 18" ALLOYS LIKE NEW CROSS CONTACT CONTINENTAL 255/55/18" TYRES THEY HAVE BEEN TAKEN FROM MY RANGE ROVER THEY WILL FIT THE L322 AND P38 RANGE ROVER ALSO MAY BE OTHERS THE TYRES HAVE FEW MM's OF TREAD ON THEM THE ALLOYS ARE VERY CLEAN AND SO ARE THE CENTRE BADGE CAPS IF YOU...

i ended up giving it a go my self i have managed to fit all the front end of the kit and parts jus left to fit the tank and copper pipe for the tank any body live local to me who could help me with the tank?

how can you repair it mate? was going to get mine regassed today when tested the condensor was leaking so would be interested in fixing the existing one rather than buying a new one?

this problem of it not starting up properly once its warm has been sorted it was related to the blue connector at the front of the engine

hi mate it doesnt smoke when it starts up jus like a normal car. the plugs where clean i have just taken the inlet manifold off and rocker covers to change the gaskets.. will see if it has made any difference as i was fitting a lpg kit thought i change those as i had to take them off. i would...

any one? no one done it or tried it

supermans_1 have you started on your bumper? i thought you had to fibreglass the ends as they didnt look stright.

the lights are done on mine they where done by a garage the lights have to modified a bit also the car front panel did you get any info about the front bumper as im looking to do this

can any 1 help with the above? im looking to do the same pls