Search results

Have you had it pressure tested... I wouldn't go ripping head off unless you have. You need to find where the waters going before you can fix it. If its not the head and you change it you've got the same problem still..

I think that's the most pages talking about cakes I've seen in the intro section... A late welcome btw..

Thanks. Well in that case... Busy weekend for me! :)

Nicky They will be bigger but not by a huge amount. Go as big as you can squeeze in fook the cost just throw money at it ;) you'll only wish you'd gone bigger after anyways haha Billy thanks very much. Fortunately for me the woman loves it almost as much as I do :)

It won't be 12.5 but will be about 33" tall

Id normaly say the actuator... but If its specific to a rpm id say your remap is the fault. You should do all this sort of thing one at a time. Not all at one go

I find it ok. It's not a huge strain. Been on well over a year and 10k and nothing's broken yet. And they actualy measured just shy of 38" when new. As said earlier 315 is across. 75 is 75% of 315 and is height from edge of rim to beginning of tread. 16 is rim size

Looks good. I've got my old(but brand new:s) fmic that I bought for my Impreza... Been toying with the idea for ages. Have you seem much improvement.

A few of this weekend. First time with the awning...

I hope you didn't drain the gearbox and refill the power steering res?

At the very least you have a water leak under pressure. So wont happen if you've got the cap off.... Leaks causing overheating... Get the coolant system pressure tested

To do with the body lift had to move the fuel filter And extend the rad pins and hi low lever. That's it. Made my own brackets for seat belt mounts and also for the bumpers Yes will be going as eventually when the time/money is right.. That pic was taken on national bokkie day apparently...

Thanks mate HD bearmach +2 springs and pro comp +2 shocks 2" body lift. Nylon spacers not ally. 315/75/16 Hancook dynapro mt

They do do mods for a disco 2 though!

So been reading through a the build threads. Got me inspired. So here it is my build. I'll let the pics do all the talking for now as its taken me 6 years to do and hopefully like others ill keep ontop of posting as I go along from now on. Hopfully there's some sort of order here :) From...

Mush I didn't notice it was you that posted and not the op like I assumed :) Makes more sense now

You bought a new master cylinder that had been built wrong ?! I may have missed this bit but what brand? And I hope you've brought it to the attention of the manufacturer. It worries me that they're selling brake parts that's they haven't built properly. Also TBL I no what your saying but...

The cage in the eBay listing as is advertised or As is pictured isn't up to scratch. Doesn't matter what vehicle it's on. Jig or comp racer. He may well be able to supply the rest of the cage to make it fia spec. But as its being sold it isn't.

I'd put money on it isn't. In fact I work next door to customcages one of the biggest suppliers manufactures of roll cages in I think I'm right in sayin Europe. I'll find out the reasons why that isn't fia other than its not welded to the chassis. There's a cross missing in the roof part. And a...

That's just a show cage. There's not enough support even if it was bolted to an internal cage and to the chassis