Search results

I have bad rattle, and would appreciate your input. Started a year ago, gradually got worse. Replaced clutch, flywheeel, fork, release bearing etc. No change, but anything only a little worse now. Rattle when driving but really bad when the clutch is being depressed. Could it be output shaft...

I am curious, did you solve this? I have the exact same problem, also after full clutch, DMF (etc) replacement .. rgds, Lars

Hope you guys can help me out here. I have moved a remapped ECU from a 90’ to a 110’. Only problem is that the 110 has ABS+TC and the 90’ did not. Now I have three amigos popping up and I am confident it’s because the ECU is not prepared for ABS/TC. When trying to access the ABS part of the ECU...

Can anyone help me with the dimensions of the rear (side) window cut-out dimensions? I am looking for the specific measures incl corner radius ... Thx!! Rgds, Lars

Hi there, I just recently replaced my rear x-member, having o cut all wires going through the frame. unfortunately I did not do the cutting, thus having no 'memory' of the wires were connected. Now I am re-soldering (re-connecting) all wires and realize I may have lost track of a few wires...

I may have an opportunity to get a set of door hinges manufactured in stainless steel in China. Could be interesting to see quality compared to price. The supplier is well known to our company and I trust the quality. Does anyone have drawings with dimensions on the different hinges? Rgds, Lars

Sorry, I believe I see the difference now....

I have a set of Britparts door hinges for a Defender. They all have different part numbers and are stated to be for each a different position e.g. 'left door - upper hinge' etc. How ever, (stupid me) I un-boxed them all without tracking which one goes where. Now are they really different and...

Cheers guys, I've recently bought a 110/STW whit rotten doors :o) Does anyone have experience with the AMA services and their glass fibre doors? I am very confident in the materials as I have worked in the glass fibre industry for more than 15 years. However is AMA delivering good quality...

Thank you, good news!!

Hi there, I've just bought a 'new' 110/TD5 replacing my 90/TD5. The 90 has a great AliveTuning remap and I now wish to swap the ECUs. Can I do this by the use of the old (first version) of the Nanocom? What is the process? Rgds, Lars

Heysa, It is all depending on the time of year ... I've been north of the circle five times, both summer and winter. Highly recommendable! Lars

Bump ... anyone? if I fit pin-pin mountings in the rear of my D90 (year 2000/TD5) .. could I then fit the front shocks intended for the earlier Defender (up to WA159806) on all four corners?

Does anyone have a drawing or chart which shows how the oil is pumped around in a td5?? Rgds Lars

Dear Avner, First of all i would recommend you to read this .. http://www.landyzone.co.uk/lz/f50/release-your-td5-power-199872.html Rgds, lars

Variable Turbo

Btw, on of the reason why I am considering this tire is because I currently run General Grabber AT2 which is a really great tire. However the side walls are very stiff giving a rough ride ...

@thor, I believe it would have been an older version of the tire you used? I thought the AT3 is fairly new ... @34064, I've heard a few experiencing too many punctures. Meanwhile, how is the ride quality ??

Bump

Does any of you have experience with Cooper's AT3? What is your thoughts/conclusion? .. and what are you comparing with? Lars