Search results

Have jacked her up and there's no movement/play on suspected wheel Either up down or side to side. Now recently the car has been going up down on The back when towing ie the back will lift up for a while then drop down again but when it goes into motorway setting this stops.

Thanks for all your suggestions guys. When it does it the front n/s you can see goes up down up down so you get a rocking motion then as speed increases it becomes less noticeable.you don't think it could be anything To do with front diff or anything on the drive train do you Wheel bearings...

No genuine wheels. Removed all dead cats before journey down here. ( so I had room for the French ones) been under today tyre looks fine. Everything seems tight.

New air bags new shocks fitted wheel nuts tight as a ducks arse While its happening the steering wheel is not wobbling about. Like you get with unbalanced wheels.

Hi all. I Have a problem,on my drive to France for my annual holiday my p38 has developed a fault. At between 30-40mph the car is bouncy its as if the front n/s wheel is the shape of an egg. It then smooths out til 60mph then it returns. Has anyone got any ideas to what may be causing this...

I've got the same janspeed system. Not deafening buts sounds good. Also on long motorway runs its ok doesn't get in your nerves.kick down in a tunnel and it's louder than Motörhead

Evening..... Will 17" 09plate discovery wheels fit my p38.

If you pm me your email address if send you a resume guide but you will need your eka code. If your can get some power into the battery that may help.

Your key should open the door even if the battery's flat. I don't know how to get in if the key doesn't work. If you haven't got the eka code you can get it from a main dealer. They got me mine with no cost.

Cheers kds. Have sent dougdotcom a pm waiting to hear from him

I had the same with a secondhand blend motor it moved a bit not much, brought a new one and that worked fine.

just got of the phone with mozz unfortunately no joy.(mozz is a top guy thanks for your time mate)so it now seems i need a faultmate or similar gadget to get me going.anyone in the notts area with such contraption please help. Thanks

Hi i have recently removed battery on p38 yr2000 On replacing it I got message telling me enter key code have done this a few times but no joy. Is there anyone in Nottingham area with the equipment to help me please. Pound notes are waiting cheers

Thanks for that info mate will make a note of the site for next time.

Ok sorted turns out to have been another faulty blend motor.

Morning gents. A few months ago I changed all the blend motors on my y2000 p38. Which sorted the constant cold air on the passenger side and cleared the book symbol The book symbol has reappeared with the same issue Constant cold air on pass side. Have removed the blend motor on that...

When my RF reciever was stopping the car from shutting the Becm down I identified the fault by locking the car while I sat in it . The red dot next to the gear leaver stayed Dimly lit. This indicates the Becm doesn't go into sleep mode and overnight will drain batt. With the new reciever...

When you suspension won't go up on Wednesday afternoon and you leave for italy on the Friday what can you do. You pays your money and carry on with your Holls

Certainly cheaper than the 530 Swiss francs I paid this summer for a rear bag and fitting.

Payment sent via PayPal Thank Tony