Search results

That settles it then , ordered!

Thanks for the reply Wammers, found Armstrong on eBay well priced, £30 inc delivery!

Err...who made the genuine one? Armstrong?

Thank you guys for the quick reply.

Looking to change the steering damper on my 1998 4.6 hse and wondered which make is best? Obviously would avoid Britpart. Regards Clive

Thank you all for your input, I will tackle it tomorrow, weather dependant.

Bit daff is the word for it! Is the flange easy to remove? Is it just a case of undoing the big nut? Any parts needed if flange is removed?

You can see that the bolts will not come out here, will need chopping off.

These photos show the problem, obviously it has the wrong bolts in it, and the wrong way around.

Thanks for the reply Wammers, ok first of all my RR is petrol in case that makes any difference. I bought the nut and bolt set of ebay, item number 271713350931. They are listed as the ones for the front and rear prop and make reference to including the longer ones for the transfer box end. So...

On to the next issue! The bolts at the tranny end look to long to come out! Is there a special way or place when you rotate the prop to allow them to be change? Also when I offer up the new prop the front doesn't line up with the diff! Now, is it ok just to rotate the diff or is there a...

Just for clarity is this the way the bolts fit on the front prop of a P38?

Biketeacherdave..you must have a v8 Range Rover by the sound of it!

Is it the same for the front then Wammers?

So in LR's wisdom when you have slight play in the uj the yolks will contact the nuts and **** the uj, nut and bolt! Surely the other way around the bolt head would be missed because it is smaller/thinner than the nut! Just a thought, must be around the way described for a reason I guess!

The slider on my OLD one was at the transfer box end, is this right or wrong! I am referring to the front prop. Also I have new nuts and bolts, which way around do they go? Do the nuts sit closest to the transfer box and to the front diff? I presume it is obvious which length of bolt goes on...

I have just received my new Hardy spicer front prop and the uj's are NOT in line. If I had to guess I would say one or two splines difference, this is just a guess!

I had a small squeak which I can confirm is the rear uj on the front prop. Didn't sound very bad but the end caps (if that's what they are called) are slaughtered, no bearings in them! And the uj is worn oval. One of the bolts that hold the prop shaft has a lump missing and one of the yokes has...

I bought the RR three years ago and the rear bags had just been done. I followed the 'how to' guide and the fronts are now done.

Just what I was looking for!