Search results

Normally you just buy an adaptor cable to go from car specific to ISO

I thought about that but it wouldn't explain how bleeding it could get some of the pedal back. Is the pushrod connected to the slave cylinder, if I took the slave out is there a way to test it and is it possible to inspect the clutch fork in any way?

no fun, get the grinder out :cool:

When I got my '95 Disco 1 the clutch pedal was quite low, it only has around 4" movement to the floor and is very heavy. It's so low it doesn't get to the point where the return spring pops the pedal right the way back out. I got in a few days ago and the pedal was on the floor. I've bled...

My 95 M reg 300TDI has indicator in both the bumper and rear cluster, remind me I need a new bulb for the offside rear bumper, got double speed indicators on the right at the moment!

As an new landy owner i'm not sure how loud they usually are but my M Reg 300TDI makes quite a lot of noise when the engine is pulling, the same through the gears/rev range. In neutral and even when freewheeling in gear it isn't much different to a regular car. I know you are sitting on the...

That's what I used, fit perfectly :D

The drain plug is a 32mm hex bolt, the filler is a T55 Torx. The axles are 1/2" square, they were easy!

Tried this today and it just wouldn't budge! Not helped by the fact you can only get a spanner on it rather than a socket. Any tips? Is it easier to drop the prop shaft out of the way? The filler loosened really easily but I was using an 18" ratchet handle with the torx bit. Also, to...

I started a similar thread a week or so back. The advice I got was to firstly check every part of the steering system for play. I did this with the help of my girlfriend who turned the wheel back and forth through the loose area. It was immediately obvious that the problem was with the link...

Will work my way through the system, it should be fairly obvious when I find it. It is almost the weekend so i'll have my nail varnish out later anyway :D

The steering on my Disco is a bit loose, there seems to be some play in the steering wheel. I'm going to take a look at this later when my girlfriend is back to give me a hand (can't move steering wheel and look underneath at the same time, any other ways to do this singlehanded?) Track rod...

Thanks, have placed a bid on the said roof rack and will see what happens.

Are you sure all the indicators are working, my right side is flashing rapindly and it is because the bumper indicator bulb has gone. Could you have an intermittent connection on one of your indicators?

It was extremely soft so I guess it was originally the correct size and swollen. I had some 3/4" hose so I have replaced it, it was fine with straight hose, didn't cause it to kink.

Hi Graham, I only joined yesterday as a first time landy owner, the forums certainly brought up plenty of answers when I was doing my research. I'm from Barrow. Matt

I did mine today and after a lot of research online I went with a 10w/40 semi synthetic rather than the standard 15w40 mineral. I put 6 litres in, not 8. my drive is on an incline but I had read the capacity is 6 litres and it seemed ok, was just above the low mark with the car on a slight...

I have seen a roof rack for sale not too far away from me (although not close enough to go and try it) but the seller has advertised it as being off a Disco 2 and has no idea if it would fit a Mk 1. It is a gutter mount and looking at other roof racks many seem to fit both 1 & 2 series. Is...

Fluid looks clean but is just below the minimum mark. Will top that up later and check for any signs of leaking.

Yeah it was the wading plug, google came up with this thread, looks like a common misunderstanding! http://www.landyzone.co.uk/lz/f7/am-i-missing-drain-plug-85321.html