Search results

If you can weld, have time and also mech. knowledge, nothing should really put you off! Most parts are cheap and everything can be rebuilt on SIII's. IIa is IMHO a better bet as it seemed to be built to a slightly higher 'spec' - bellhousing is stronger (friend ran a 280 bhp IIa through standard...

Friend who did this reckons it's pretty good. Have to disagree with Teflon on 4203 through standard Landy 'box - got a 4203 in a vehicle and it's worked since day one (mot'd, taxed and run flat oot @50 mph) - has been trialled, used as farm vehicle (shunting sh**e) and never fails to start...

Under 12mm (IIRC) legal but A: difficult to check B: Plod generally doesn't have a clue ( but will probably give you a producer anyway c: As tyre rolls contact patch expands and depands (impands??) (wiki this :D) tyre may pinch tube. d: unless they're not through to interior of tyre (just...

Also bulging hoses can give a spongy feel -Goodridge or local hydraulic hose manufacturer if you want to pay real prices - if master cyl leak, pedal will 'sink' (but no fluid loss - press pedal (engine no need started) and if it sinks (but no fluid loss) you have a leak back past m/cyl seal.

http://www.combineworld.co.uk/cgi-bin/www.exe?Mode=Record&Dealer=No&RecNo=1 Mercedes 6ltr, V8 twin turbo 512hp and best of all it's cheap to run 'cos it's diesel :D . Just out of interest, what 'box are you running with that engine? and which "Jaguar" engine is it? Not taking the pi*s or owt...

Bonnet scoop off a WRX, Cossie teatray and twin-DTM tailpipes? seriously, though, front of my 100" was modded by filling rad recess with panelling bent to same curvature as wings and a strange aluminium 18x12 slotted "tray" covering part of rad (had volvo 264/5 radiator fitted) - made it look...

Oh - I have a 4203 in a SIII and throttle cable operated - done when I got the vehicle but it works fine - will take photos and email if you want. IIRC 'full throttle' on a 4203 seems to be about 2250 rpm anyway ;)

Timik Agricultural, Church House Farm, Clewers Hill, Waltham Chase, Southampton, Hants., SO32 2LN Tel: (01489) 896626 Fax: (01489) 892188 Can supply but other than gaskets, seals etc - they'll probably order from Perkins (if available) HTH

Being from AyburrDEEn and therefore more likely to take the good name in vain than spend money, can I suggest the 'window sticker' I had made? - on the front of my 220bhp 100" (90 front end) it said (reversed) "Get The Fu*k Out Of My Way!" ? Courtesy costs nothing but an Aberdonian who wants to...

One mag (IIRC LROI) had add-on kit for sIII for (IIRC £750-ish) - power assistance from local farmer's union - about £100 if you know what to ask (and how to ask)

pass. But have a 6cyl t/e pickup (no mot but will pass no probs) with new engine ( got engine lined up) vitamultinATtalktalkDOTnet

2.25 diesel, 2.5 diesel, 200tdi, nissan 6cyl diesel, mazda t/c (Perkins) 4cyl , lpg v8. Got all of them in buggies. Best IMHO mazda diesel & hc V8 (petrol) - sh*t mpg but scared beemers at 120mph+. (90 front end and modded rad mountings)

20tdi will fit as will g'box (some b/head mods req/d) Gas a hc v8. Same mpg, scare beemers ;)

Just joined - series hexpert!(well, I know them a bit) Had a sh**ty year and past few years were cr*p too. Want mud*y years and a new life (I'm tax-exempt) and son will be rebuilt on a pre-73 plate so he is too (reg'd 1994 but wants to play with old L/R's too!) Getting shot of 30+ LR's and 12...