Search results

I just got it off ebay, chap from poland after later research i think he is on some lr forums not sure which

with a diesel landrover you rarely need 1st and 2nd low box, only to slow it down for tricky obstacles 3rd low box is like 1st high box first thing you need to know is let the clutch out and take you foot off it if you cant do this in 1st high, then your right in going for 1st or 2nd low so...

hello chaps, I have been through all the mpg debates with my range rover. It runs a single point mixer system. I changed the single fixed mixer ring(which was actually an expensive one) to a BLOS lpg variable mixer. Works similar to a su carb (float moves up exposes a needle with slit, lets...

check if the banging on the prop isnt just diff carrier bearings

Its probably the lambda sensor get a garage to check it over, or do an emissions test for an mot yours is mems 3, so you can grab a secondhand one from a rover of that year or get a brand new bosch one dont buy a cheap one

A friend of mine had a tdi with a similar problem, flicking on tickover On a strip down the camshaft bearings were worn not sure if that helps!

As above i used to have cheap ones in my 200 after i found none were working! tdis arent super reliant on good heater plugs anyway

yes, i had this problem, superceeded They fit fine you just need the right socket, if you havent got the right socket you might find some old stock from somewhere. or the old nut if its ok the originals are actually inch and 1/4 btw! hth