Search results

I buying a 2001 TD5 and one of the first jobs is to recondition the front propshaft with new UJ's and centre bearing. Another TD5 owner has pointed out that the air conditioning drain plug is situated above the centre bearing and the constant drip of water (aircon is used all the time here)...

Hope I am not hijacking the thread but in respect of the P38 syncing I have got conflicting answers to my own problem so I am hoping some of the knowledgeable posters above might be able to help. I have a friend who has a 1997 P38 and needs a new key remote. We are in Malaysia and the stealers...

My headlights are rubbish so I definitely want an upgade. I am looking at Ring xenonultima which were mentioned earlier in this thread but looking at the vehicle handbook it just gives the wattage, so do do I get H4 for the main/dipped (60/55) and H1 for the inboard full beam lamps (55)? ...and...

Does anyone know if there is a RAVE (equivalent or any other version) for Range Rover Sport? ...and if so how I could get my hands on one? I did a search but only found one posting from someone asking for a Haynes version and I'm pretty sure they haven't done one - they've done one for the...

You should be able to put the VIN into Microcat Parts Program and it will tell you the original configuration.

If it were me I'd go for a nice LWB Series III or Defender. But whatever you do, make sure you check EVERYTHING and replace ANYTHING if in doubt before you go. I took a 109 across the Sahara to Timbuktu and back and it was a daft thing like engine mountings that nearly got us stranded. It's not...

Now that's just not nice.

The colour scheme inside is all over the place; just bling thrown at it. ...and it might just be me, but I like to see a clean engine bay as evidence that someone actually cared for the important bits of a car rather than just washing it at the weekends. There's no excuse for letting it get into...

Having said that, he's got a luvly looking Classic for sale in his other items.

You have two options: 1. If your computer is able to write CD's and/or DVD's start the relevant program and direct it to use the ISO file you downloaded to write the CD. Then run RAVE from the CD. 2. Alternatively, you can download free programs (mentioned above - search for them on Google and...

I have had a hell of a job getting these off... the tyre place I went to had to hammer the socket over the caps to get it on; I presume they were using a 27mm. When I later serviced the car myself, the wheel brace in the car was very difficult to get on and when I tried to undo the nut using an...

Thanks for that; plenty of options there :)

Those nice people at Land Rover fitted an auxiliary power socket in the rear loadspace of the P38 from 2000 onwards but mine was built in 1995 so I ain't got one - but I want one! So; does anyone know if the wiring is already in there and all I need to do is fit the socket? I have had a fish...

van?

I don't let anyone 'valet' my P38 except me; apart from the fact I don't trust 'em its a good opportunity to check it all over and focus closely on it to find all those 'preventative maintenance' bits that need doing - like fluid appearing on the wheels and loose screws knocking about inside...

My first RR was a two door (1978), bought it from a dealer near Warwick in 1988 - basically because I'd always wanted one. It had LPG conversion which didn't work very well so I ripped it out and got 50% of the load space back instantly! I took it to Scotland on a camping trip and it broke down...

I didn't think the sunroof tilt worked with one touch - it doesn't on mine and the handbook says it doesn't. Was that a later modification?

I have been after these for ages as mine are all corroded under the plastic/rubber :frown: Very difficult to get because most people want to sell doors complete and that creates problems for me shipping-wise. Given that they are about £100 each from the stealers it might well be worth going for...

I didn't need to remove the rubber grip to replace the gaiter. I replaced the gaiter with a leather one from ebay and I have removed and replaced the window switch pack a couple of times to work on the fascia switches and the gaiter has come over the handbrake lever without any trouble and is...

Lift the cubby box lid to reveal two screws under the front lip either side of the catch. Remove the screws which release the window switch pack. Be careful that you don't lose the screw retainers. Lift the switch pack to disengage the two clips at the bottom from under the walnut gear shift...