Search results

Ref mad hat man. If you read my post you will see this at the bottom. It is possible for a light squeel to come from a clutch but it will not be from the bearing This very light squeel normally hardly perceptable is possible when the clutch pressure plate fingers lightly rub against the...

Ryder you have not thought this through. Dont listen to the self proclaimed Mr Fixits without questioning. You state you have a squeeling sound? You state that when you put your foot on the clutch the sound goes away? A clutch release bearing does NOTHING. Until you press the clutch...

Spyderman. The bang you hear might be the layshaft exploding out from your gearbox if you use 2nd!!! For christ sake do the accelerating in 4th gear HR only!!! The engine power is the same no matter what gear you are in and that is what will free your clutch plate. Using a lower...

Hi Jai. I dont think a p38 diff will work for you. I will sort out some springs for you. You might have to buy new drive flanges. Not that many good ones left!!! And we still need to measure your axle. Call me in the morning. I might come over with you.

Most of my customers junk the whole lot! At least you found your inlet manifold vacuum leak:D

If you are still thinking 2.25 then here is my personal experience. I learned to drive with this car and it is still in the family. Series 2a 109. Capacity std 2286 cc 8:1 cylinder head machined/skimmed 100 thou (2.5mm) Gas flowed and port matched inlet and exhaust manifolds...

Fundamentals to start with. 1. If the engine idles OK. 2. If the engine pulls hard with large throttle openings. You can pretty much eliminate all the crap and stick with a carburettor/inlet leak issue. Dont look so hard for problems. If your description of the problem is accurate the...

I know most of you guys are totally against calling yourself a "club" or even want to join a club. But... EVRYTHING you guys do is what a club does. Including. Arranging green lane days/trips. Helping fellow "club" members when in trouble. Arranging pub meets. Trying to arrange...

Best make that a copper mallet! Carefull when you use a hammer to re assemble it. I have not known a successfull re assembly just using hammers. Every time you hit a cup you dislodge the needle rollers. They then turn and sit against the end of the spider and you can never close the cups far...

Ref Carpy clutch issue. Your description of the problem with your clutch is common problem. Without seeing the item in person I can only be 99% sure it is the problem. You have incorrectly set the clutch hight and in doing so incorrectly set the clutch pedal without having enough free...