Search results

Hi guys, just had the air springs replaced on my TD5 (2002) only have something else happen two days later. My wife had complained that there was no hot air coming from the heater just cold air pumping out, the next day I tried it and for the most part she was right although there was the odd...

I haven't had the chance to check either the pipes or air springs for leaks so for now the TD5 stays on the driveway until the weekend. I'm going to order the air springs from Paddocks as they accept returns and if it's the pipes there's a Landy garage nearby who I hope will have them in stock...

Thanks, I've seen some Dunlop air bags on ebay for £93 + Vat but there's no mention of clips. Are the "ntc9449" a bog standard clip are are they all different. I'm not quite sure what to order? Land Rover Discovery 2 DUNLOP REAR AIR SPRING TD5 & V8 on eBay (end time 08-Oct-10 17:51:22 BST)

yup, it's older than 7 years. It's a 2002 model 7 seater. I can't find any help about how one actually replaces them. I guess jack the back up, whip the wheels and hopefully the rest will be obvious...

Also I'm wondering how this happened? The night before I had gone to Ikea to buy a flat pack warderobe which I'd left in the back overnight (weighing 40kg) could this be a reason as to why the air springs broke?

Well, when I got back home last night I did what was suggested and jumped in closed all the doors and started her up. The compressor works as it pumped up the back and all was level again but as soon as it was switched off, down it went again and this time I noticed a "windy" noise coming from...

I don't know much about the rear suspension on TD5's, it's Never happened to it before, I have a fob to raise and lower the back would this solve the problem for now and what exactly is the problem with it?

My wife just e mailed my a picture of our TD5 half an hour ago. It hasn't been used since yesterday when I didn't notice a thing. She says the tyres are inflated but it shouldn't be as low as it is, looks like the rear suspension has gone, any other thoughts?

Thanks, do you reckon I can find the part name and number on the download?

Hi all, I'm after a new set of these (?) for my 202 TD5, It's the plastic bit in the floor what the rear two seats click into when in use. Mine, as you can see are knackered but I've no idea what they're called or part number. Any ideas?

Sounds good to me, any recomendations for the Herts/Essex area? Cheers Al

Err...I mean condenser...

Hi guys Just bought some of that "Air con in a can" from Halfords and it seems simple enough to use. Thing is, on the gauge it starts at 0 (in the green area) and stays there, moves up slightly when there's pressure but sinks back down to 0. So I need to check if there are signs of leaks, I...

Hi, when driving my TD5 auto the battery light comes on (only sometimes) when idle for example like waiting at traffic lights. Driving, no problems at all, never not started and today I took the battery to be tested and it seems that it's fine. Is there an easy way to test the alternator or do I...

Hi guys, looking to test out my MAF and a couple of turbo issues with my 2002 TD5 auto, does anyone have one who lives in the Herts/Essex area. Will pay cash for your time and usage? Ta' Al

Well, it's not going well at all. Tried knocking the 37mm spanner with a club hammer but it it keeps going round with the engine bit. Tried holding one of the four 10mm nuts/bolts where the fan is screwed on to and using it as leverage but the bloody spanner fell through and I can't reach it...

Hi again, it's all looking good but I need to smooth the paintwork before I spray the laquer on should I use glaze or G10?

I'm giving the radiator and intercooler a clean and hopefully the engine to. I've my 36mm cranked spanner in hand problem is when I move it anticlockwise the bit it's connected to also moves. What have I forgotten to do?:confused:

Nope, unfortunately I don't but I was going to pop to Halfords this afternoon. Another question I had was what adhesive to use on the foam rubber of my A bar. I took it apart to fix the cracked plastic and paint the other bits but the foam must have been ripped out from the metal frame at some...

The touch up pen ran out last night, should I order another from Land Rover or will a Halfords one do the trick (colour = Java black), it's just a small area left? Ta'