Search results

Noticed my o/s/f Tyre was losing air so ran down to my local Tyre place this morning and found the bead was leaking. After it was done the guy said i had a band bolted into the centre of the rim to stop the Tyre coming off in the event of a puncture, anyone ever used this type of thing? He also...

1989 2.5td 127k miles starts and runs like a dream

You "should" have self leveling headlamps and washers, but this is what I'm trying. You will need new headlamps with a clear lens and the reflector that sets the beam pattern otherwise you will just have a blinding blob. These are like the lamps I'm using , unused from an old project LAND...

My 19j has just sailed through the MOT, as has been said get it nice and hot with a high speed run to clear all the soot out of the exhaust ( high speed being a relative term lol)

Best free satnav app i have come across is NAVFREE, its totally free and works offline as you download the maps to your phone or tablet, been working great for me.

Found this when looking into fitting a 300tdi lump into mine, not done it yet but saves cutting your chassis about it allows you to use the standard engine mounting position on the chassis and fits around the oil filter

That does look like a nice bit of kit, but i measured the wall thickness of the pipe yesterday and it is 5mm and even the one you listed says it will only bend up to 4.5mm so i think anything but an industrial bender will struggle so its looking like a non starter

Its for free so got to be worth a try

It don't look a bad bit of kit, just don't want to buy it to find out it ain't man enough

Will this pipe bender stand a chance of bending a 2inch pipe with a wall thickness of 4 or 5 mm I'm looking to add tree sliders to my 4x2 rock sliders and can get my hands on the tube for nothing so would like to use that Hydraulic Tube Rod Pipe Bender Complete 6 Dies Red 12 Tons Bending 90...

found this whilst searching some time ago, seems chunky enough not sure though NEW UNIVERSAL HEAVY DUTY PEDAL CLAMP LOCK CAR & VAN SECURITY IMMOBILIZER | eBay

Good idea, i suppose the easiest way is to blow them through with an airline.

Brilliant, cheers for that

I have an 1989 90 and both the front and rear diff pinion seals are leaking, first question, is the bearing spacer shimmed so i can just undo the pinion nut replace the seal and re torque the nut or is it a crush spacer? Next question is what seals to order, the axles front and rear have disc...

Yeah got to be worth a try before doing anything major

My winch has packed up, not used it yet just operated it. The solonoids are clicking in both directions, gave the motor a couple of taps and it started working for about 30 seconds so suspect a motor problem just need to identify which winch it is to look for a manual, it's got a Superwinch...

Mine has had different gauges fitted with actuall temp readings, was at a play and day sunday and the temp never went above 82C, on the 40 mile drive down there at 55 touching 60 at times it sits at about 100C if i coast down hill for a while or drop to 50 it dropd below 90C

I have carried out all the normal checks, got it hot and checked the rad, no cold spots at all, top and bottom hose get hot. May get a laser temperature gauge and see whats happening

About 55 seems to be the sweet spot, just wondered if running at 100C was going to cause any problems or an intercooler would help

When i first got my Landy it ran quite hot most of the time, checked everything and found the rad fins full of mud, cleaned all this out and runs much cooler now, 82-88C, went green laning for the first time the other week and the the temp stayed at about 83C which is great. The only problem now...