Search results

Mine did this, I cleaned sedimenter and replaced fuel pipe between filter and injector pump and.... touch wood, all is well now!

Most likely something you've disturbed, probably where manifold joins rest of pipe.

I wouldn't think it's the donut if it gets loader when turning. More likely to be front diff or similar. Or maybe even tyre pressures

I've got one of these, it came with my breather kit, but all this does in group all of the seperate breather pipes into one.

And to answer your question in a civilised manner Brian. I bought the wing moulding, the top and the flexi off eBay, I had the stainless tube lying around and I fabricated the rest to suit my vehicle.

Very unbelievable, I didn't even know landrover made a TD4 disco!

Hi guys, I've recently fitted a Southdown snorkel to my 300tdi disco, had to modify it slightly as I have a 2nd battery where the original air intake is, so made a new hole through the innerwing and into airbox. I now want to fit my extended breathers. I don't really want a pipe running up the...

Check connections on stop solenoid, do you had wading plugs or extended breathers fitted?

I'm sure Landrover just put extra wires in to confuse you. Mine has electric everything and there are still wires that don't connect to anything.

Removing the thermostat won't do it any good, it puts too much pressure on the head and is more likely to blow head gasket, check water pump as mentioned and also ejector valve (little black disc in the line under the header tank with 3 pipes to it. These often fail and cause problems.

If you've got a noise that sounds like a worn bearing, I'd start by looking for a worn bearing:D

Yes, no problem, I ran with no front prop for a few months. Took it off to replace UJ's and found out it went sideways quite well so I left it off a while. Although John from work says he drove a disco 60miles with no front prop and it blew the transfer box up..... we can him BS John!!!

Just an update on mentioning Frank pickles to Adrian flux...... Made FA difference!

Where are you mounting split charger?

Fairly easy job, not alot can go wrong really, easy do it in a day

I had some 3mm thick rock slider sills made up that replaced the old sills, I also made new body mount out of 5mm box section.

If you plan on doing much offroading it's worth changing track rod ends for better ones. they come with lock nuts.

I think it's on the side of the thermostat housing but could be wrong.

Yeah, it's got a long way to suck fuel on discos, thick fuel (oil) will bollox it up quicker. A preheater is a good idea if you plan on using svo in future.

Hi all, I'm currently running a 2" susp lift and 2" body lift on my disco. I now want to fit the following: TF503 - terra firma -2" tubular turrets TF501 - terra firma front relocation cones TF520 - terra firma long travel rear spring relocator TF835 - terra firma RTC steering damper (for...