Search results

Hi Luiz As my conversion was from a petrol land rover engine to a diesel land rover engine (land rover did make this range rover SE automatic at a later date) the parts are known and available. I have not heard of this International HS 2.8 engine. If it is an Isuzu engine there are kits...

Will save my legs though as I have to keep getting out to fill her up :)

Hi I would be interested to know how you fixed the light problem as i have a problem with 1 light behind passenger high level that will only come on via the switch and not the doors. As the car does not appear to have switches on the door shuts, as my RR classic, your answer might help me find...

Hi Dave Now that you have the new radio fitted is the sound louder as my standard radio isnt very loud at full volume. I will be interested in your post if it makes the radio louder. Thanks Craig

Hurrah My Range Rover is back on the road again. It turns out that one of the bolts holding the torque converter in place had come off smashing into the senser that reads from the flex plate and had also bent the teeth of the flex plate. The senser has been repaired, teeth straighten on the...

Well the bad news is that it is not the airflow meter but could be the flex plate that has shattered. When cold the car will now start but sounds like a bag of spanners but will not rev at all. It is being plugged in tomorrow so hopefully I will know then

Hi Kingson I carried out the conversion my self. I had to purchase an addapter plate to addapt the engine to the auto gearbox and weld in new engine mounts but as the TDi only has 1 wire to control it other than the starter motor there was no real problems . Mating the...

Hi all I am looking to fit a 300 TDi in to my 4.6HSE P38 amd was wondering if anybody has done this or knows of any body who has done it. I have converted my LSE classic to the 300 TDi and an very happy with it. But with the P38 there is a lot of electrical parts that might not work...

Hi all I was driving the Range Rover today and pulled out in front of a lorry and acelerated away fast. Loud noise from under bonnet and then the car dies so I quickly pull out of way of the lorry on to hard shoulder. The car will start but immediatly dies again and again and again. I...

Hi the switch is only forty quid but everything inside ie connections are fine so a spring for 50p sounds like a better bet to me. I would replace the switch if connection were corroded but there not so why give LR the money for it. The switch is made to be taken apart so don't know...

Hi all I have a problem with the tailgate sending a message to the dashboard saying that the tailgate is open. When I get out and check it is fine. So I removed the cover to the lower inner taigate to find the switch. Once removed I tried to find out what was wrong. I have found that...

Hi All My Range Rover LSE which has abs and traction control has a problem. I have bleed the brakes and the lights on dash board will not go out and I only have brakes on the front off the car and they are not good. The abs pump came on for a while then went out as it should but still no rear...

Check this out for manuals LAND ROVER MANUALS DOWNLOAD

I suspect that you will have to get a plate between the engine and gear box as the Range Rover was never intended to have a diesel from the start. Both of mine had to have a plate between them. I have a contact if you need to talk about it Longranger vehicle manufactured from used land rover...

eBay.co.uk: Diagnostic Test Book Rover Group - Land Rover - Rover (item 260099425149 end time 27-Mar-07 22:25:45 BST) There you go ;-)

Hi Im not sure what engine the 90 has but I have 2 Range Rovers a 1989 vouge SE and a 1993 Vouge LSE that I have converted to the 300 Tdi and they are more than capable unless you want to do over 90 mph or 0-60 in 10seconds :p I now get 400 miles to the tank instead of about 280 and by the way...

Hi I have listed the same problem on my LSE in the last couple of weeks but have had no reply. The only differance is that my mirrors would not work on the dashboard switch before. Thanks Craig

Mine did the same at local Tesco store but I had no idea what the EKA code was or what to do with it. Got flat bed home and had to go to local dealers with the log book and they printed the info off for me without charge and it even had the radio code on the sheet. This is a very important...

Update to this problem. I have now found the corret relays. They are yellow and fitted tight under the front of the seat and not on the floor pan. The relay that I found first was the ABS relay. I managed to blow the fuse to this and nearly had a heart attack when I started the car after, and...

Hi All since owning the p38 I have not been able to move the passenger seat (non memory) forward or backwards or up and down. I have narrowed it down to one of the relays under the seat but can only find one of them and when I remove this one the seat back still moves so I need to...