Search results

mine's fine but I know there are some that do cause probs, apparently there is some kind of adjustment screw on the back which makes it run slower or faster. Probably better to get a replacement from a breaker - don't worry too much about taking the central dash apart as you can quite easily...

on mine, when the sport button isn't pressed the surround glows green (like the rest of the Hi range selector) When it's pressed I get the "S" on the message display and the button surround glows red

Jimmy Not sure if this will work as I can't see the previous PM I sent. I want the 255/55 R18 Pirelli Scorpion tyre you have offerd for £60. Can you let me know if it's still available and how much to post (i'm in Doncaster). Do you have paypal or will a cheque do (before you send it of...

jimmy sent you a PM with my details - bit concerned as it isn't showing in my sent items - did you get it??

Jimmy I'll have it - let me know how much delivered & how to pay (paypal, cheque etc.). PM me

jimmy has this gone yet? I'm interested. PM sent

as already said, use it now & again. It might be a case of the previous owner not knowing how to get it into low box by stopping and selecting neutral, waiting for the orange light to come on & stay on the dashboard. If you select low box before the orange light comes on perm (normally...

i did mine with dark grey plastikote and it came out really well (also did the little bits under the headlights to match) It is exactly the same shade as the bumper. A lot of chaps recomend something called "forever black" which seems to do a brill job (I'll be getting some to do my door...

sounds like the unit has gone into a shock mode (not sure if that's the right term). Try removing all the leccy plugs from the unit (easier than disconnecting the battery) and then re-plugging them in the unit should reset and let you eject the cartridge (it might spit it out automatically)...

This got a bit technical for me - in our house we only ever need 2 taps - 1 for hot & one for cold

modelman Although I'm not a fan of aftermarket grills on the P38, I must admit your's is the best one I've seen & does look well smart, especially against the red paintwork. Seen some similar ones on fleabay but they are going for £125 plus and, at that price, I'm OK with my original one...

when you had the fluid changed did the garage put enough back in - this is a classic sympton of trans fluid not getting to all the clutch paper plates. Check the fluid again and also make sure it's a clean cherry red colour and not burnt (also a sympton if not enough in the box). Other...

on mine there are 3 pumps, one for front creen, 1 for rear & 1 for headlamps. When I got mine both the rear & headlamp pumps were shot. Rather than get universal replacements I went down the breaker route and got a compete set of 3 tested working ones from P38 spares. Apart from the...

you could try something like teh mudguards that are fitted by Ford to transit flatbeds. Not sure where you are located but the company below does'em & I'm sure they will courier Van and Truck Dealer in Doncaster - www.imperialcommercials.co.uk

ugly I used to use this in my trails bike and always put in in my MT tyres on my old toyota landcruiser. OKO Off-Road Tyre Sealant 1.25L - Agri-Supply UK Never had a problem with fitters when replacing tyres

24 carrot when I had mine converted to LPG the installer (local indy LR specialist) suggested replacing the plugs with iridium ones. They handle the slightly increased temp & clearner burn better and apparently last a lot longer than normal plugs (over 40,000 miles). To be fair mine ran...

jeffers happy to have helped, it's nice when all the toys work

jeffers it's in the post this morning

coupe of things I did on mine that you might want to consider - when you take out the plugs, be careful, they can be really tight & when you do change 'em consider iridium ones as they last a lot longer (40,000 miles plus) - change the filter & fluid in the autobox (if yours is an auto...

as others said the P38 was never designed to be run on coils but if you have decided that your coils are the way (which seems a little odd considering all the EAS bits you have already changed) you will deffo need the little black box to fool the BeCM that the EAS is still fitted and working...