Search results

I would but Ive just bought a new project and thats where all the goodies are going.

I have just fitted some second hand 11 leaf spring to my swb and it now leans over to the drivers by 2inch. I suspect that I have fitted them on the incorrect side. I did look for a part number on them but couldnt find it. Are they directinal as well as left hand/right hand? Is there another way...

I have a front clear wind screen on my RRC but is not working. Check all the obvious stuff but no luck. Would a stone chip affect the whole wind screen? Any other thing to try?

thanks. That explains why it has an inline fuel filter fitted just before the carb

I have a series 3 1983 petrol with an x military engine Sadly its a non runner I think the fuel pump may have gone. I have removed the pipe from the fuel tank and held my finger over the end and cant feel any pressure. What is confusing me is that it appears to be a diesel fuel pump (without a...

thanks for that. Think a new pump is in order.

series 3 army petrol engine water pump is leaking out a hole in the bottom of the pump. The hole has no threads. any ideas? Would idealy like to repair the pump. 303053_10150457125345132_534800131_10974796_829783384_n | Flickr - Photo Sharing!

I have a poor mans ditacable tow bar. I do used much and most of the time I dont have it fitting. The towbar is just standard but with new bolts and copper grease. The only problem is find a suitable location for the cable and sockets where its not going to get damaged but can still reach...

Looks like I have found whats been causing the damage. See pic. I may have been because I didnt have the top of the springs attached with clamps. They were half out all that days off roading. DSC01302 | Flickr - Photo Sharing! sorry its a link having trouble up loading pic to the forum.

Disco look good. Where did you get the arches from? My club is very big on trim. When i got the range I had to re-fit the bumper corners as the new rear and winch bumper didnt follow the same outline of the old one. But they missed that I didnt have a battery clamp! I have not had the range...

I think I need to have a good look where the tyres are catching. Sadly I cant mess around with the rangie to much as I use it in ALRC RTVs and they can be very anal when it comes to mods.

Off Road Power Santa Pod - Range Rover Classic | Flickr - Photo Sharing!

I like the look of this range rover. Look like 90/110 arches.

looks like the only option. £120 from paddocks.

Im not keen on cutting the arches.

nothing has been cut out of the arches. will it still pass an MOT if the wheels arnt covering the wheels.

100_1009 | Flickr - Photo Sharing!

100_1009 | Flickr - Photo Sharing!

224000 Its had a v8 and now has a 300tdi

I have range rover classic with a 2 inch suspension lift and big tyres. The tyres are catching on the wheel arches and cutting chunks out of the tyres. Any ideas?