Search results

Sounds like a half shaft to me. If its a standard Rover Axle you dont need to remove the diff. regards

This a subject that really annoys me. Although i've been SE for a long while i still remember the tricks that garages play, not just the ones i worked for. A common one is wiper blades, a MOT is down to the discretion of the tester and even a slight smear on the glass can be a failure. Also...

Im very similar in my shins and forearms as i did Muay Thai for many years and part of training is conditioning parts of your body you hit other people with like shins elbows/forearms and fists and that has led to many injuries and burns because i just dont feel it untill its bad. was stood in...

On a Military chassis parabolics are tricky things to fit! But i woudnt worry about the clamp and in terms of leaning that is likely due to wear as the MOD springs are pretty much unbreakeable but were generally replaced with standard HD/109 springs or even 1 ton springs. If you want...

I have recently come across the ACR website and i see listed they sell a high flow silencer. My question is why would some one buy this high flow silencer when they could just cut the silencer out their current exhaust and weld in a straight bit of pipe? Would there be any effects in MPG or...

Come on look! Got excited then.

Ohhh yes its a great feeling.

Hi, i have a ffr 109 and have looked into this, the short answer is visit EMLRA they have a lot of people with mod specific knowledge. Long answer is that it can be done. IF you still have a H/D chassis then it will have 2 settings on the the front dumb irons and on the rear crossmembers, dont...

Bit controversial this but i personally would give a Zenith copy a try. I have on my FFR a Allmakes 36IV Copy which was abut £40 shipped and apart from a few poor quality brackets and clips has been spot on for about 6 months use. I didnt expect much but for 40 quid it has been a good buy.

Faded old Nato green and fresh Nato green.

Yep a battery cover with two pull down hooks like what you have on the bonnet. Well on mine any wa

IIRC there were quite a few tings wrong with that landy, it was a very late 2a but it had the radio gear fitment of a later vintage but not quite sure when. Bloody good program tho

I believe so Flat but i havent seen these for years nor the IR goggles. Nice 90 btw i read your thread on emlra.

Very nice well done. Tempted by the 2353 ambulances that blanchards have sold over the last couple of years.

Just to confirm is it leaking from the housing where it meets the block?

Nice job!

Cant see how this is considered spam as thers nothing in it for him but there you go. Shame you cant get them my nephews are land rover mad.

Really nice old war horse that. Will you paint over The IRR Paint? Military Land Rovers are my main interest although im from away from an expert, but i think yours is a 3/4 ton utility truck 12v GS (General Service) vehicle and if kept original is quite a rare thing on the scene now as years...

Yeah was just a thought, i havent been under a 90/110 in a LONG time and i dont think iv ever taken a buck off so dont know how they bolt to the chassis. But have decided to make my own wooden dropside anyway and then can fit a greedy cage.

Seems like your out voted here old chap! And thanks for the long and extensive answer i am much clearer on the situation now:rolleyes: Yes but they are very very rare i have only ever seen one, twas on eBay with a galvanized chassis but no MoT and sold for i think about £600:eek: I was...