Search results

Hello All, Trying to find a good pic of the rear of dash clocks and ignition switch 1980 2 1/4 n/a diesel. Stripped down by previous person and nothing labeled nightmare. Also this wiring appears to differ from my land rover wiring diagram. Can anyone help? Thanks.

Writing even.

Let's not get into an argument about this. This forum is for us to help each other is it not? I have no vested interest in promoting Snap-On scanners but I wouldn't say our scanner is capable of doing a task unless it had several times. I pay a fortune for regular upgrades because having Land...

Rasher. The operator should know how to operate his scanner? Without knowing the model he is using I can't help you sorry. It's a bit too far from N.Yorks to you.

It IS NOT CORRECT TO SAY SNAP ON SCANNERS ARE UNABLE TO PERFORM THESE TASKS. THERE ARE AS MANY MODELS OF SNAP ON SCANNERS AS THERE ARE DISCOVERIES. OUR SNAP ON SOLUS ULTRA PERFORMS ALL THESE TASKS AND MANY MORE ALL THROUGH THE LAND ROVER MODELS.

Hello there, problem is when on/off power key inserted drive wheels power up and scooter sets off forward and will not stop until key pulled out. Key is a push in type like the old fashioned immobilisers on cars.

I understand this is our land rover forum but in dire need of help to fix my Booster tetra Roadmaster 4/8 mph Mobility scooter. Anyone know where to obtain a wiring diagram? Tried for ages on internet. No luck. Need her working for upcoming Landrover shows and events.

No. I have had Japan imports before. V5 states: date of first Registration 01 07 2002.(DECL/D MANUF 1994) A new one on me?

Hello all. Just bought a 200tdi 3 door, ( Discovery no.17). 1994 m reg. However its has an egr valve! Also it was built in 1994 but not registered until 2002. can anyone shed any light on this vehicle? vin. SALLJGBF3LA077483/ Only 76K miles recorded.

Hello, I have posted same problem in V-8 section. Will let you know when I get to the bottom of it.

Hello all, No. 7 cyl. intermittant missfire .Can happen at all engine temps. If I pull over switch off engine and resart its "cured" untill next time. Its the fact that it goes away after stop/start of engine thats a puzzle.i.e. not a loose lead or dodgy plug. Any ideas?

Yeh, such is progress. They are supposed to be water proof however. Many vehicles now come with a hub/bearing assembly but Discovery 2 seem a little ott. I just wondered if anyone had any experience of the cheaper bearing. They have a 12month warranty and seller has huge good feedback score...

Hello all, has anyone tried the the front wheel bearings available for under a £100 from ANDYSPARES on e-bay? Hell of a saving if o.k. I usually pay £215 trade from motor factors.

As the owner of a garage ( and several land rovers ) that specialises in 4x4 work. I often see bad comments regarding poor service received from other businesses. Please don't think that all mechanics and garages are there to rip you off. Some of us take great pride in our ability to do a...

Thanks for your input lads, vin no. before autodata quoted problem. I don't think the 27ecu's would like a battery disconnect switch and then there is the hassle of opening the bonnet and removing (awkward) covers to switch off every night. Just to complicate things the fault is now...

Update. Traced to DVD player supply Fuse 53. The car doesn't have a DVD player?? Investigation continues.

Hello all, anyone come across parasitic battery drain on a discovery 3 that we've traced to circuit on facia fuse 58. TELEPHONE,MULTIMEDIACONTROL MODULE,TELIVISION TUNER. Pulling 2.7 Amps! out of battery when ignition off. A simple fix would be nice, apart from leaving fuse out. Any ideas? Thanks.

Well up to now no leak. However gear oil now spewing from shaft seal in transmission brake housing. Don't know yet if a lip seal or more rope? Ho Hum.

I will let you all know the outcome. The whole engine clean at moment. Not a leak in sight.

Thanks for all your input. After engine run for 15 mins turns over by hand nicely. She's run for about 2 hrs now and no leaks, but we shall see? I know on pump shafts this type of seal designed to pass a small amount of fluid for lubrication/cooling. Never seen this type of seal on an...