Search results

Yes it will start mine as being a 95dt the fob is only used for remote locking. However in later years the fob has to interact with a coil at the ignition switch. Not sure but I think from 96 on. You could check by taking out batteries from your fob and trying it before you buy one.

I got a spare key from Jim Mann [email protected] If you email him a pic of your key he will advise if he can cut one from the pic. (no need to send key at all) cost 8-10pounds incl p&p. Worked for my 95dt to open doors & do eka. I secured it inside the wing with a tiewrap

Update Running for week now with new reg/brushs. Runs at 14.3-14.5v. Batt volts in eve 12.5v dropping to 11.95 in morning. So yesterday did current test. When becm at sleep still 0.4a flow. Took out fuses in turn. When either 39 or 41 were taken out current drops to required 0.04a. Therefore...

Update Running for week now with new reg/brushs. Runs at 14.3-14.5v. Batt volts in eve 12.5v dropping to 11.95 in morning. So yesterday did current test. When becm at sleep still 0.4a flow. Took out fuses in turn. When either 39 or 41 were taken out current drops to required 0.04a. Therefore...

Result:D Thanks to Irishrover for supplying me with donor fob. I have cannabilised it, transferred tang, fitted new cover and batteries, synced it & all is good. I have attached some pics and notes as help for others as I could not get info elsewhere. Perhaps it's a one off breakage. When...

Do you mean tag with numbers on? or the tag that snags the tab from the batt neg? the latter is the one I need, I have a blob of solder instead at the moment. For awhile I was getting the message of low battery with new batts, but message is gone for last week. However it reminds me to sort it...

Thanks, but I plan to de-solder the battery contact and fit to mine. Otherwise I know it's big bucks!

Hi all, The battery contact on the circuit board of my key fob broke off shortly after I got it. I made repair with solder but I would prefer to do a better job as sometimes it doesn't work. Would anyone have a keyfob that they will sell, doesn't need tobe working. I have tried to get on...

This may help regarding alternator charging discussed earlier. I had been experiencing similar problems for many months and reached a solution today. I had regular charging voltage of 13.6v but still battery charge deteriorated with short run use after maybe a week, so I would have to trickle...

I have been experiencing similar problems for many months and reached a solution today. I had regular charging voltage of 13.6v but still battery charge deteriorated with short run use after maybe a week, so I would have to trickle charge. My eventual conclusion from other posts was that the...

Have a look at wheeler dealers episode recently on discovery with same problem. He fitted recon compressor but you can rebuild cheaper. (it may not be the problem) It can be your first bit of ongoing 'playing' with your p38. Welcome to the playroom!!

Thanks guys, I looked briefly in both areas but will do more tomorrow. Are there 'test points' I saw mentioned elsewhere? but I can't see anything like that.

I am still trying to resolve this 'airbag fault' . The recorded fault is 'firing circuit short to ground '. Clearing the fault only worked for a few seconds. I fitted a different ecu & rotary coupler a year ago but no fix. I have now fitted 2 bags and ecu from a p38 that did not have...

i have new 105amp battery in a 2.5dt and get 12.5 overnight with 13.75 max when running. I do a lot of short journeys and regularly have a flatish battery (just about starts), I was advised that eventhough it reads near to 14v it may not be charging properly that there is a common fault in the...

Did you also put in a new lower value for the highway setting? I expect there would have to be a difference between them and maybe that difference is a set amount??

I did just what your proposing and it worked fine. Got it from lrdirect.com. You should also order the slider pins with it as old ones probably corroded.

I had alot of similar trouble but with a 95 which is slightly different. However maybe start with door unlocked, disconnect battery in engine bay for 10mins to clear any confusion in the ecus. You will then start with eka input again. Are you doing the 4to the left first, before the eka...

You may sort out the flashing lights by pulling out any fuses for eas -underseat & engine bay, or disconnect battery-make sure it's unlocked

I regularly tow 3500kg with 2.5dt manual. It took me awhile to get used to a driving pattern for take off. I think its a combination of a high first gear and the way the bmw engine delivers the torque. The engine seems to be more suited to leisurely cruising and will go easily at 50mph at under...

I have just had similar experience with 0.6a drain. This is too high it should be 0.03a. I found based on another thread that the alternator is at fault. If one of the diodes is blown it will allow the drain. If you disconnect the cable (that comes along the side of the engine from the...