Search results

My Td4 has developed a noticeable wobble at 1500 rpm when pulling hard but disapears over 2000 rpm. just changed the front drive shafts and thought they were faulty. Checked for bent shafts or poor CV joints but all is OK. I notice the genuine LR CV joints are different than the ones I have...

Hi All I hope this is the right place to ask a question about drive shafts. I have just replaced both front drive shafts on my TD4. I now have a wobble around 15mph to 30mph. In order to make the job simple I split the shaft at the IRD and gear box end to assist getting the new splined end...

Hi All My 2003 Td4 has the same problem. Done about 130k now and the clutch requires a bit of force to push down. Only get a smooth gear change when the pedal is on the floor. Been looking for a clue as to why? Cant see anything wrong with the mounting. Bleed the system and checked for...

Sorry for the delay. Been climbing in Spain. Thanks for your info. On with the EGR mod seems sensible and the PCV is on order. Is there a way of checking the VNT set up. From under the car with the engine off I can move the activation rod and the arm conncting it to the VNT ring. With the...

Hi All My TD4 Clutch feels very heavy. Needs a lot a foot pressure to get it to the floor and must be pressed to the floor to get a clear gear change. Is this normal for the Freelander TD4 or should I be looking at renewing some parts? Any info would be helpfull Cheers Safeman23

Dont know if you have got it fixed yet as I'm new here too. Did the same thing. Went for an 03 freelander with 120000 on the clock. Went like a snail. Have a look at the synergy 2 set up. Get the new MAF from these guys and clean everything out. EGR, inlet manifold. Disconect all the plugs...

Hello from Safeman23 I'm from Isle of Skye. Just got a FreelanderTd4 to play with. Sure will be jumping in with questions as I get down and see what needs doing. Cheers