Search results

ok mine is an older one with an sd card i will send you a pm

Sounds like the new style All working cable sd card ect? if so i will have it

Is it the old style or new style mount

Hi do you have the spec on the tom tom i need a new sat nav old one i droped once to often

I have got one im to far for pick up but i can sort out delivery im looking for £50 plus delivery used needs a scrub and paint but sound condition.

Pleased you found the pics useful dont forget the side bushes are handed like i did. When pressing in use a bit of copper grease and when you have a bit of tension on the rig and the bush starts to bulge just tap it all round and it pops straight in simples apart from the huge plume of black...

Looks like its going ok when i did mine a bit of plasic deep inside in the wires needed cutting

I had my diff bushes fail in under 6months so replaced them with polybushes easy to do without a press burnt and cut out the old ones and pressed the new ones in with a vice wood big washers and threaded bar.

Extended the auto box breather after it blew off when the garage j used to use over filled the box:mad::mad::mad::mad::mad:

Reading the same each time means you have good precision 0.5psi is acceptable resolution but you have no idea of the acuracy. didnt one of the lr mags do a test recently on pressure gauges.

z

So are you saying coin operated ones are not calibrated ? Ive got several gauges and all read a bit different even on consecutive measurements I am thinking of something like this to use with my compressor PCL MK3 ALG3H04 TYRE INFLATOR AND GAUGE SINGLE CLIP ON | eBay

All measurements are a version of the truth and when made by a human verry subjective. When your measuring the pressures with gauges of the quality like you have they are all going to give readings that are slightly off. What you might hope to achive is good Precision (getting it wrong by the...

Cut a shelf for the rear just need to carpet it now!

Driven it with a crisp new mot on the seat beside me.

Good luck with the spacers would be nice to see some pics when done. Pleased you found the info you wanted pitty some people took the request a bit personaly.

Rear exhaust rubbers failed in under 6 months so orderd some from floflex.

Sorry it is stored away at my mums will get some pics early this week

Where abouts are you got one without sides but has all the sockets to slot some in im near grimsby

Sent you a pm with some pics 370 lmin 13cfm bit dusty but runs fine near grimsby