Search results

mine has thick washer ans longer bolts. The front are slightly higher than the back so tilts it back slighty. works a treat

I have spent the last few year living in ski resorts over the winter. I have no experience of MT on snow however: Generally most Landies have BFG AT/General Grabber AT. I have driven a Landie with Cooper Discover (cant remeber which ones though, stupid as i have driven it for 3...

just try a comparison sight as well, mine from there came out cheaper than a specialist company. im now with swift cover, about 400/year for me and my missus. I was 23 when i took it out, on a TD5. Good luck mate

Watch out for the ACE system if its fitted. About that age, it will probably be starting to rust(The pipes that run around the chassis). A bit of a bastid job for somone, can be up to £1000 to be replaced, or convert it, but will still cost around £400 (all garage prices) for the work to be done.

Where do u get 15p a litre. I would love a V8

When i PX my Disco 2 ES in 1999 V, 120K on the clock i managed to get £4800 for it. Not bad i though as i only paid about £5200. So in a 18 months it lost £400. But they are expensive machines to maintain so make sure your not stretching yourself, as u will need to repair it!!

Did a bit of greenlaning. It was Sweeet!!!!

Depends on the additive, some say every tank (like the one i use) some every 3-5 tanks, some every 3000miles and probably more options than that!!!

I had an ES Disco Td5, lovely car, had all the bits on it. Was very confortable, however always worried it would break down, now have a defender TD5, love it. As long as u leave enough time, its not stressful, a little noisy it you are going fast (70+) but i have a/c in mine, so its fine on hot...

Found some lanes, i bloody loved it. Was awesome fun and really nice to get away from traffic etc. Didnt meet anyone, just a couple of walkers, but they seemed happy enough. I forgot how slow u go, only just got above idle in second low. (before anyone says it i wasnt trying to go fast, just...

I use one of the Millers Diesel Aditives. My TD5 wasnt smoking or anything, but thought i would treat it as i had heard good things about it. People like TD5 Promote it and alot of good reviews on the Web. Just starting using it, run 1 tank through. Doesnt seem to do much Noise etc, however i...

Thanks, think i will try the with the Y which start at the A3 and goes towards the Youth Hostle then does like a big u shape and joins the A3 again. Does anyone know if thats over grown?

Done some reasearch, found some Byways which i think are BOATS. I know where they start so thinking i may have a look tomorrow as i have a day off. Its the Hindhead Area. If your not sure of the names i have stated, i can explain where they are as i have found a map, and i have seen the...

Just fitted mine Shifty. Thanks for the advice the other day. My bolts came out easy. Looks like they had a little copper grease on all of them. I found the easiest thing to use was a socket set with the various extensions/flex angles etc and the Hex adapter in the end

in my old Disco, anything down from about 17-18 was cold and yeah it should go to low.

Could be your Clutch Master Cylinder on the way out. Mine started feeling Sticky on a long drive up country, after a few hours of driving, the top of the clutch went sloppy and the bite point on the floor. Check your fluid level to see if its leaking. Mine wasnt leaking out, but the seal had...

Cheers Shifty

Is it necessary for these to be done when Land Rover Say - Think my manual says 48K. Mine is on that now - Should they be done or is it a check and monitor job?

Do you have the econ button pressed? Make sure it isnt on or it wont engage the A/C

cheers, Im not precious, i just need it to get to work and back. I will look into HindHead. I drive through it every day to work.