Search results

waste of fluckin £££££

are you getting pressure in the turbo hoses? Have the hoses come loose?

check your fuses are all ok in the fuse box. My fuse box is f**ked and the fuses come loose or fall out when greenlaning.....check with a test lamp to make your life easy

What's the mileage? Can you hear the chain? Why are you worried?

Hi All Is a 110 front headliner the same as a 90? Thanks

Check for air leaks, also have you serviced if lately? Fuel filter? Cleaned intercooler out? Can you feel pressure in the turbo hose when you rev it?

The sump can be a right bugger to seal correctly, are you sure it's not that? I had a leak at the vaccum pump which ran down? Have you checked above the sump at the back before you consider the main seal? I would agee with you regarding the crank seal that it would come out of wading plug. So...

Yep.....

might be wrong - thought you had a 300tdi! not sure about 200tdi. Have a quick search of the forum - must have been covered

To replace the belt will take about 5 mins max! And that includes spending 4 mins looking for the bloody spanner needed to release the tension on the belt tensioner and change the single serpentine belt. Its a 14mm or 15mm

I removed the headlining, dried it, removed old cloth and spent £8 on some stretch fabric and £6 on spray glue. Looks like new

Do a search on clonk! Transfer box input shaft? Remove PTO cover on back of transfer box and inspect the state of the spline. Search here and there will be some pics or google

Yep....like I do!

Keep it. Fantastic bit of kit.

Is there a recession? Wow, looks great so far.........mine now looks like a pile of ****e.......

transfer box! Worn spline

Check that you have been sent the right part! Are the top and bottom uj's different lenghts?

read up about VIBRATION! You could be causing yourself a lot of work even with a small 2in lift!

Sorry to ask a silly question......are the exhaust rubbers/mounts all ok? Check that the exhaust isnt fouling on the chassis

Grab a 2nd hand one of Ebay.....have that bench tested cost around £100