Search results

Polytrol is supposed to be good.

I have a 4.6 on Lpg and I tow a small caravan with it. Never goes over half way what ever the weather or road conditions.

Over priced I think. New ones next month though, old ones are dirty! Lol

Just done mine, i took drain out of bottom of rad then when all the water had come out i blew hard down into the header tank a few times to get it all out!! But it did get the water out of the heater as when i took of the pipes off little if any water came out. Also replace the screw with a cap...

Yeah they are at the top of my road so they do my work car! Feel free to pm me and you can pop round to see the finnish on my car.

I have a Edelbrock on my 4.2, had it on the 3.5 that i took out as well, much better than the 390 Holley that was on it before. You can rejet easily if you want as they are better suited to the larger Rover V8 but it ran fine on the 3.5. And they look great. Try Duksville Speed Shop - hot rod...

Now clay it before you wax it. Makes it much easier to clean and makes the paint smooth as glass.

Don't think a local garage to me will sell the 52 plate one they have for £13999 then!

1997 4.6 HSE on Lpg 120k running well. Couple of silly electrical problems but nothing to worry me.

My girlfriend said the same thing!! :lalala:

Cleaned mine today as well, but with clearance items from Halfords. Advanced car wash 500ml £1, Demon shine 5lt £4.99, Turtle wax liquid clay £5 and carplan bumper and trim shine 500ml £1.50. Tried the liquid clay stuff as ive already clayed it with a bar so the paint is quite smooth but it did...

Thanks Irish.

Good evening boys and girls, do any of you know what this wire is for? I have just done the heater matrix o rings, not a nice job as i think some one has had the dash out before as there are cable ties on things, screws missing and broken bits of trim. Also i think the screw had been replaced...

Anyone used polytrol?

That's what grinders are for! LOl

Yeah will do one as soon as i can get the bloody screw out of the heater matrix to change the o rings as that was my next job today!! Seized solid!!

The center exhaust box on my P38 V8 had seen better days so today i removed it and welded in a piece of straight pipe (60mm OD) It took a bit of trial and error as the pipes in to and out of the box arnt inline, so you need to set the new pipe at a slight angle. Best part is the noise!! It now...

You disconnected the main battery feed when you took the fuse box out

Pop it into autobase in Deal. Ask for Keith. He is a landrover man and knows his stuff.

Ah that answers a question for me, as mine is a 97 (V8) and the box doesnt have a dipstick, so i guess its had a new box at sometime?