Search results

Took her out for the weekend taking the otherhalf away for her birthday. She got muddy. So did the landy. Unfortunately ive got a whine from the box in 4th and 5th mainly. Always known it to be loud but not this loud and whiney. Recently did an oil change and no metal lumps present just swarf...

Got this second hand head I am rebuilding to replace mine. Just wanted to point out a few marks and get some opinions? There are a few chips of metal stuck to the cylinder section around the valves, some as little dips into the head and some as slight raised sections. Also there looks to be...

Drove it. Looking forward to changing the head and stopping the chuffing exhaust.

Services her today! Need to get some bits for the cylinder head. I have a replacement second hand head to rebuild and stick on. My current one has exhaust studs that are stripped and its not holding the exhaust manifold tight enough. Plus a glow plug had snapped off on cylinder No. 4 so i...

tempting me more now ha. That is the one thing putting me of doing something very different, the work involved.

ty for that. Turned out the spade connector on the solenoid had fallen off. Couldn't see if until i gave all the wires a bit of a tug! Do like a cheap repair.

Got to work early this morning to try and work out what is wrong with my landy. Tried jumping it, same symptom, click and no turnover. Tried different battery, same symptom. Tried unlplugging the starter cable from the back of the ignition and starting that one. Again, nothing. Finally I...

Ah lovely thanke I shall try that!

Ha seen that! possible idea but i like the idea of those juicy multfuel dervs

bought a second hand head to replace mine. It has exhaust studs that are stripped and and a glow plug that has snapped off in the head so I though I would replace the whole thing. Went to jump in it after 2 days of sitting and turned the key 'click' nothing. Light come on etc just wont even...

Ha cheers for that. Ide rather replace as soon as pos. I can drive my work van about but rather have me landy! Does that stuff work on metal?

My power steering pump to box pipe has rubbed and is now leaking. Its the metal part of the pipe but I can't seem to find a direct replacement for the whole metal and rubber pipe. I have a td90 with a 200tdi fitted and wondered if something strange has been made up to fit it. Here is a joint...

Fitted new exhaus & intake gasket after the old one split. Found a stud missing from one of the holes, tried to fit another but the thread was stripped. Another one won't tighten uo fully so that must have damaged thread too. Bum. Still holds in place we.

Drove it work and the exhaust & intake gasket split. Sounds like a steam train. Ordered one of those up pronto. Also been ordering all its bits for a service. Overdue

Yea i thought as much and bought one. :d

Drove home from work and my horn wouldn't stop going off by its self. Wiggling the indicator stalk sets it off. So took the plastics off when i got back, two wires came out from somewhere attached to the indicator stalk. didn't have any torx security bits to take separate the bits. Does anyone...

Stuck the rest of my exhaust back on after it snapped off before the muffler. Was driving around and going deaf! And inhaling all the **** that came up from the passenger footwell. Garage welded back onto the steel weld, need someone with a tig welder to put the mounts back on and repair a...

Used it to tow my quad to work. Then stripped the quad, cleaned it and made it work again, now its going to be towed back home. Found out my leak is actually ATF fluid so I'm guessing an O ring has gone on the gearbox inside the bell housing. So its gotta come off when I have time and coins.

Guessing a gearbox off jobby and probably new clutch if its leaked all over it. ? :behindsofa::frusty: