Search results

What made the Disco guy go in the hole ? Couple of years ago I was with CRAG when we cut the vegetation back on that lane to reveal the proper track. It had grown out and people were going around it which casued the hole. We cut it all back so that sort of thing wouldnt happen. When I drove...

Thanx for that thats one hell of a snorkel on that blue one I looked at the rebel one but I wouldnt be able to get the pipe to run inside the front wing as the heater stuff is in the way I think still giving me ideas

thanx for the heads up Had a look around on the internet. Not an easy item to find :(

Was thinking of fitting a raised air intake to my 90 2.5 PETROL. Not planning on wading but I have seen a Disco in wales drop into a muddy puddle on a lane and the nearside dip into the water and sucked water in. Only thing is I cant seem to find a raised air intake for the 2.5 carb petrol...

I had an alisport plug in chip (connects to black lead inside fusebox similar to rs232 pritner connection) for my 300tdi EDC auto P reg It made a hell of a difference to pickup. Fuel economy didnt really change. Wasnt cheap either Now here is the rub On kickdown or when booting it created a...

Alisport did intercooler removed cat, EGR blanked, ITG air filter. I had an alisport plug in chip (plugs straight into the seriel lead where the fuse box is). It makes an amazing difference. But be warned On kickdown it was like a james bond smoke screen out of the back. It was also pushing...

Lot of people trying to sort that AGM turning into an epic slog by looks of it

My D1 (5 door) has just failed its mot. Needs new o/s inner rear wheel arch and new n/s rear body mount. Welding is a dark art to me so I need to pay for it to be done just wanted to know if they are pigs of a job and roughly what is involved or rough ideas fo costs so I dont get ripped off...

Recovery wise: Another vehicle , Jack and base, couple waffle boards and a spade, tow rope few shackles and a couple bridle ropes should see you good for almost anything recovery wise. Breakdown wise as per lists already. Make life easier laning a decent saw and a machete and pair of gloves...

Seeing as I am now hard up going to have to start doing more jobs myself on my Disco and m8's Defender as hes skint as well. Cant afford to spend the earth on snap on gear so Anyone recommend a decent gear puller ? Is a prop shaft removal tool worth it ? Got a boggo standard socket set any...

SOmething for everyone. Couple deep water runs, few axle twister bits, plenty of rocky hills to go up and down few loose shale bits as well. The woods are a great area with some technical areas - great for 90's without roof racks although seen 110 with racks go round less demanding areas. If...

Depends what you mean by "off roading" These boards seem to class off roading as pay and play sites. SO if you want mud and stuff look on there. If you want to greenlane check out the previous thread's in the Greenlane area theres a coupel of Shrops / West mids ones.

Its odd as the transfer box was the oil that was low and it didnt look like gearbox oil but then it was dirty before i cleaned it up. Was serviced at a landy specialist 6 months ago and had oil in both box's changed. When u park up and dry it off no leaks until you run it again. Other jobs...

OK took it for a run and this is what I found when I got back Just the one leak looks like it may have been from the gearbox filter washer but I cant see how oil could make its way up to the higher part. That black washer looks a bit damp. The only other place I can think of I have labelled...

Gearbox oil was full to the brim when I checked Transfer box was down some so I guess its t/box oil Gunked underneath and pressure washed it. Bunged in some stop leak stuff so will see how it goes.

Get the land owners permission is the right way unless it is common land. However as the guy above said usually set up late and go early leave little disturbance. Dont be tempted by where you see someone else has had a fire as 1 if you get caught they wont care if you say someone else had had...

Champion 12000 lb winch from winch solutions. 3 years old used 3/4 times per year. Never missed a beat. I think most winches apart from real expensive warn and goldfish are made in same factories in china and who ever orders them just puts on their own label and appropriate mark up. If I...

thanx for the reply is that gearbox filter a difficult job to sort out ?

Can anyone tell me which gearbox my 1986 C plate 90 2.5 petrol has please or how I can identify it. Also if that box would have a breather and where to find it as I cant seem to find one When I park it up after a run I seem to have a bit of a gearbox or transfer box leak looks like running...

Trailwise can be very outdated. Also what may be shown even on a current OS as a BOAT or similar may well be closed permanently or temporarily by the local council. Try to find a local group that lanes they should know what is open or failing that check with your local councils rights of...