A lot of these guarantee's are engine & drive train, I got conned a few years back over it, my solution was to wait until the place was busy then discussed it loudly with the salesman that I had dealt with including the line "so now you have my money your not interested in any after sales...
Blanked mine off about a year ago, made a big difference low down on my auto, still running sweet with no problems.
I just cut a bit of steel, drilled 2 holes in it and put in in the joint at the front of the engine bay.
Nottinghamshire Police – Police go off road to tackle motorbike nuisance
[url=http://forums.mud-club.com/viewtopic.php?t=47305&highlight=desert[/url]
Most common problem is the ends of the pipes split just follow them from the actuator on the offside inner wing and either trim them back or replace the pipes
You have to take them out of the skirt, a little bolt (or screw) each side and pop out the ball joint at the top, one of mine had an earth come off the lamp which stopped it working.
Try this link for programming single button fobs.
Discovery Series 1 Key fob programming : Mud-Club Articles : Technical library for Land Rover, Pajero, Suzuki, Jeep, Toyota, Discovery, Range Rover, Freelander
I'm told that on a 200tdi Under the bonnet on the drivers sides the wiring loom off the battery goes in to a length of cloth, inside this length on cloth is four wires which have a fuseable wire in them which is just soldered in place and is open the the water and dirt that gets inside the...
The converter is wired into the speaker wires on an aftermarket head unit then the rear door subwoofer connector is then plugged into the converter to retain the use of the rear door subwoofers.
to use an personal cd payer or even better a mp3 player you could use one of these adapters...
What you need is a high to low level speaker converter, there several different types/designs around.
This retains the use of the subs in the rear door with an aftermarket head unit.