Search results

Slide hammer / bearing puller but you need the room ta use em so rad out will that give you the room?

I have a set of impact stud extractor that makes mince meat of most locking nuts put them on the 20v Ingersoll rand gun and rip email off helped a few people out

I do have the eureka immobiliser on the disco not sure about fitting a disc lock to be honest I've just purchased a 125mm battery powered angle grinder with low profile head and it's the muts nuts put a cutting disc on it and will go through most security devices and only cost 400 quid that's...

To be honest there going for around 800 to 1200 for a good 300 tdi yours looks a very nice 200tdi 3 door id say about 1600 I would not pay more than

Helicoil

Lol I work as a salvage machinist for main caterpillar dealer so a lot of my work is removing broken or stuck studs ect or making /salvage parts you should hear the language trying to get a m30 broken stud out . On the plus side if you do ever need helical ect give me a shout

Wot area do you live in m8 as I have spline extractor set should do the job

Err don't think you should be using different size tyres on the freelander m8 viscous coupling don't like it

I think it's nice looking I used to have a 3 door 200tdi but I think it's over priced

Welcome

Welcome m8 I've got a disco 1 it's a labour of love with the disco honest

Welcome can't say that I use paddocks as I'm only a mile away from craddocks

It makes me sad that there are so few skilled engineers out there now I love my job I get to play with very big machines making /salvage parts for them where I work we have a full machine shop I still get to do some screw cutting on the lathes ect very rare you see that now

I do drill grinding classes at work (using machine and manual method ) it is a skill that is being lost just as general machining is such a shame the big mistake is that for thin steel you should alter the drill point angle use a centre punch to stop it running all over the place and use a drop...

Gota love helicoils I work in heavy plant as a salvage machinist so have a very good collection of them all the way up to m60 lol most of the time they are stronger than the original thread

Hi m8 had same prob woz prop shaft bearings don't fit the cheap ones will not last long

Hi m8 is it a big job to fix ripped diff mount:)

Welcome kevb

Thanks lads 300 pounds sounds very good will be 1 of my first jobs to get done ive driven the freelander and no hint of it being tight but will still get it done:hijacked:

Hi m8 hope you don't mind but wots the cost of rep the vcu and bearings at bell I get a freelander 1 this Saturday