Search results

Yes they are, give them a bit more force or replace.

Luckily I very much do have a clue as to what I am talking about with many years experience.

What an absolute load of baloney, it requires a simple localised repair for years more life.

How bizarre. well done for sorting, i do love a Land Rover tale with a beginning, a middle and an end! ;)

Try checking your bottom pulley, they are two piece bonded together and when they start to delaminate they start knocking.

3 + 1 on the inlet side,(48 & 47), 1 in the back of the head plus the screw in plug behind the exhaust (21 & 23), not sure where else .

Mine too, always used Dexron .

NLA

It's fooked , needs a new 1/2 chassis.

You also need to check the red plug on your ECU for oil contamination via the injector harness which is a very common problem.

I just used a soldering iron to weld mine back together.

I would check your bottom crankshaft pulley, they are a harmonic balancer type pulley and this happens when they start to separate.

l would suggest you have 3 different problems there none of them ECU related: reversing light/parking sensors could be your reversing light switch needs re-adjusting (winding out a thread or two). The wipers not parking is a fairly common issue which involves a repair to the wiper motor or...

Don't write off the 200tdi which is a fantastic engine, also don't be afraid of the TD5 which has proven reliability. You need to pick the best vehicle available to you on condition rather than purely engine choice. Start off by looking at as many as you can noting the condition of each before...

Yes

Might help if you put model and engine type?

Burnt out clutch.

"Ellena Lee Sorry for my scepticism but it looks as though these "rats " are contacting members of this page using a female Asian woman to pose as a victim ... she's playing the card of someone who needs help and is asking if anyone would be prepared to go to court to help her out .. I spoke to...

2 bushes, selector bush FRC9985 and lower down yoke Bush FTC2203.

It's a harmonic vibration damper.