Search results

thanks for help just been reading up sounded a bit ott to drain hole system and is there a good reason for disconnecting the battery for one connection :confused:

thanks for reply can this be done without draining down cooling system I was thinking disconnect sensor, loosen take out thumb over hole slip other one in quick minimal loss of coolant top up

charged me £320 to supply and fit recon vcu and fit support bearing plus 3 diff mounts supplied by me

hi iv got an intermittent fault, poor idle on start up ranging from, running ok, to poor idle gets better when warm, to a judder ruff idle and you can feel it though the seat. sometimes slightly raised idle speed. white smoke if revved smell of un burnt fuel starts first time every time and have...

tyre pressure monitor system

@ Nudge68 thanks some good reading :)

bell engineering don't believe in our test as such they say other thing's can influence the results but I now think if you keep all things the same when testing (same bar ,same weight, test done before driven ect) all we can do is monitor it will post back with result from recon unit

now if you could build one with a tpms display id buy one

possible I have no idea when I tested mine last week it was about 5 or 6 degrees

another up date iv had a recon vcu plus my support bearing's and dif mounts fitted at bell engineering last night great service all done in just over an hour :cool: (big thank you to them) plus the added bonus I got out to play in some proper snow on the way back :) and she performed beautifully...

how's it running now you got her going have the two injectors made a difference

They have been for the last 2 and 1/2 years (35000 miles) iv had her, new tyres bought in pairs, new one's always on rear also I do keep close eye on tyre pressures she got 126,000 miles on her now, iv got no paper work to say when or if the vcu has ever been changed before.

Just a little up date iv done another one wheel up test today before she had been driven, to get a better comparison to a test I did 6 months ago (35 seconds) not driven not good it's gone up 60 seconds :( and that after recording a time of 50 seconds earlier in the week after driving it. so iv...

Going to do another one wheel up test tomorrow before she moves anywhere, just to see if it makes any difference to the times.

This is sort of my thinking too, Iv got genuine diff mounts and a pair gkn vcu bearing's in the shed already been on the phone to bell engineering today they wont have vcu till middle of next week so will use the time to do few more one wheel up tests probity end up getting recon one for piece...

Thanks for the reply, The reason I ask is I have started to feel an intermittent judder in ist gear and reverse been under her today and found the front rear diff mount shot and some play in the vcu mounts while I was at it I did the one wheel up test and got a time of 50 seconds this was after...

hi when you do the ''one wheel up test'' does it matter if it has been driven before or not will this affect time results cheers

when doing the one wheel up test does it matter if the car has been driven or not if so will this effect timed results cheers

on mine I think from memory there is an adjustment screw on the inside of door at the bottom that attaches to the bottom of track / channel which pushes the track in or out and this tilts the glass in or out

Im having a little clear out so I have for sale 5 trek 17" alloy wheels with 4 used winter tyres £120 NOW SOLD :):):):):) https://www.ebay.co.uk/itm/282835571107?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 1 nearly new Michelin synchrone 225/55/17 tyre £20...