Search results

i hope u ran a bead of sealant round the back of the block, between it and the flywheel housing, or u will have a leak there too...

i broke mine with water. I put some in the intake by mistake.... that ****ed it!

go for 300. You know it makes sense...!

TDi power is however the way to go... tow starting me mates dead van up a hill for 1/2 a mile, easy... poxy van didn' start though, air in the fuel system!

should fit then unless youve got the wrong zorst.

You can pull anything with a Land Rover

i aint got my oil cooler fitted, an their aint a thermostat in it either only a pressure valve. Wanna fit it though so i can turn up the pump :D

you can pull heavy stuff with an NA... a 20 foor tree trunk out from under 6 foot of hard clay, by one end fer example!

is it a factory tdi?

nah you dont need seals... mine hasn't had any for the last 3 years, it allows the air to move around so it stays drier :D

it probably will do more than a completley stock 90. Like reverse up a wall. Or summin...

i kinda like it... Not really sure why or what for though :)

could call team landyzone to come out and help? :)

LR90, old 106 going next week Old metro that was free soon to get an older midget, for peanuts Open to offers for any cheap or free cars :)

ooo ihadn't though of that. I'd like to see it too :) What kinda profile are TDi pistons Uncle Charlsey?

Oh yeah, use a good quality seal, and you may find that by just bolting the flywheel back on you have damaged it by not being able to see if it has gone on neatly or not.

NO NO NO!!! That will come loose, spin in its housing and empty the sump on the floor. Look. Take the flywheel off. Then remove the starter motor. Now, take off the fly wheel housing. Clean up the mating face between that and the block, and run a nice bead a silicon gasket between...

guess why i run coputers i build myself with serial ports in them - most high end motherboards have all the hardware, you just need a plate with the socket in to connect to the header on the board. :) USB microchip programmers dnt work very well.

http://www.landyzone.co.uk/lz/f7/300-tdi-upgrade-61619.html

ere landowner, do a search!!!! :) I have a thread on here with my 300 being fitted, out of a 95 disco, no electrics at all. Give us a shout if you want a hand with it!!