Search results

I got 4x39W+2x27W on my front as 18w's just aint enough.

If you cant find one locally ill nip up and grab one for you as there was one there bout a week ago.

Dropped mine off for a new clutch. What courtesy car did I get. A rover 25 :(. There was me thinking my clutch was a bag o ****e. At least I barely need to use it other than to pick me car back up.

Any 18" disco4 rims going cheap? Pity

Just wait for bell. http://www.landyzone.co.uk/lz/f9/ird-specialists-121439.html

I thought it was that with mine, but turns out it's the lower bush needing replacement.

I didnt bother with half of mine. Drilled the head off, then vice gripped the stub and twisted it that way. On the more stubborn ones I drilled a hole through the bolt stub and put a pin through it to get more leverage.

Hey all. Who is headed to LRO with a freebie this year? I wont have mine with me unfortunately, but will be there. Whats the goodies availability like there, should I bring a good amount of cash? After a bush kit and guards probably. cheers

You could supply them for a commercial freebie though?

Bump Anyone?

I have two of these, one just drilled into the bottom of the lip of the dash, just below the bottom of the glove box door. http://item.mobileweb.ebay.co.uk/viewitem?itemId=251243533095 Gives direct light into the footwell rather than background illumination. Much better for finding keys etc...

I was just thinking if it was a manufacturer fault anyway.

http://www.landyzone.co.uk/lz/f38/freelander-tech-bulletin0112-creaking-rear-75223.html I have the same thing by the sounds of it. Is it something the dealer should fix?

The switches are very hard to find, I managed to nab the switch frame, one switch and three blanks for two quid from a scrappy. I bought the switches new direct from LR as they are the cheapest anyway, but was still near £13 each, and I needed five (replaced the cruise control switch hole for...

Connectors are ZZPlug02 (from dingocroft anyway) and the switches are VVN100000, although what I did was go to a scrappy and cut off a few connectors and crimp them.

Carlisle

I'd be interested in a pair. Will stop any glare from my front spot bar. Got the original sunroof blind kit off eBay but its just not enough.

I run 4x39W LEDS (in the above round style) as a front roof bar, 2x27W on the front bonnet, 2x48W square shape on the rear and 1x 72W batten on each side, all from ActiveLEDLightbars (imported from china). I cant rate them more highly and have been pressure washed many times, as well as covered...

Its not undertaking really. If you are in the inside lane anyway and the pillock is sitting in the middle, then you are just continuing in your chosen lane at your chosen speed, thus there is no overtaking.

A painted steel one would be OK I think, might be cheaper too. The exhaust guard id be after would be the mantec stylee with decent rec points.