Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    4wd to 2wd conversion

    people will remove the full prop and VCU asm for various probs. They run fine in two wheel drive mode, mine is at the moment while i rebuild the prop and replace the VCU bearings.A Freelander is basically running in two wheel drive normally.I know the kit you are on about, you can just buy the...
  2. C

    Droning noise-NFF?

    If you get chance to remove the prop and VCU go for it and it will give you some idea if VCU/bearings on prop or something else.
  3. C

    A Bad day at -3 ...bbbrrrrrrrr

    The lock asm is not part of the handle . You can repair the plastic unit or replace as said above
  4. C

    engine start

    Is this the same TD4 with the smokey exhaust? If so this problem might have been better included in your other post. The more info you can give the better.
  5. C

    smoking exhaust

    Have you got some more details.FSH? how old? when was last service?Mileage? How much oil are you using over what time/mileage
  6. C

    egr valve blanking/emmission light

    the EGR valve in itself causes an obstruction to the airflow into the turbo and also over time will build up deposits of oil causing more of an obstruction. Do a search for EGR Valve and all will be explained and then some.Here is one fred...
  7. C

    How many speeding points you got??

    3 at the mo but previously none in 25 yrs of driving
  8. C

    egr valve blanking/emmission light

    There are lots or write ups on this forum have a quick search. Removing the EGR is a basic mod and cheap. I have removed it and been through MOT's with no problem. It will not throw up an error light.
  9. C

    freelander td4

    there is a lot of different ideas on this issue. LR say 26 but a lot of people run from 30 to 32ish which seems to help. I run mine at 30 with no problems
  10. C

    TD 4 Auto Very slow to change gear when cold

    mines the same as Singvogels and I have just done an oil change so dont worry about it.As Marky says though yours is due but make sure you read up on it first.Undo the wrong nut and its loss of gears and off to someone who knows how to strip the box
  11. C

    Possible fuel pump death need advise please

    Have you made a circuit to the pump ie 12v in and return incase as you said there is a wiring fault?
  12. C

    Thermostat problem

    are you driving normal road speed or stuck in rush hour traffic? 4 miles doesnt seem that bad to get normal running temp if stuck in traffic
  13. C

    maf sensor

    no probs mate. out in the morning but if you need it will drop the keys round
  14. C

    maf sensor

    if the engine does not change when the MAF is disconnected then it is kaputt matey. You can always nick the one off my TD4 to prove it
  15. C

    ac1

    do you know when the VCU bearings were changed if at all. Have you looked at the VCU and done the test.? http://www.landyzone.co.uk/lz/f38/definitive-freelander-vcu-testing-thread-99163.html
  16. C

    TD4 engine not performing well

    could be fuel starvation. collapsing pipes ( lack of air intake )
  17. C

    ac1

    Like Hippo says more info. What state are the tyres in. What mileage is the freelander on. Does the noise change pitch or volume as the speed increases.The more info we get the better.
  18. C

    Removing egr valve

    It's the 1st thing most people do after doing a search on here. Nice,cheap and quick to do and as James and Bigeeeee say removes a possible problem before it happens. Get it gone.
  19. C

    2 stroke in TD5

    I am putting a ratio of 200:1 in both my TD4 and my TD5 and both of them are seeing a vast improvement in smoothness while ruinning and engines are a lot quieter.
  20. C

    spanners man

    If you have any probs i should be available on sunday to come over and help you out if you need it.
Back
Top