Search results

Hello, I am after a bit of help. I have a 10A SD1 3.5 on SUs installed in my 88". The problem I have is that No. 2 cylinder is not firing, using a infrared temperature probe shows the exhaust not keeping up with the other cylinders as the engine warms up. I have checked the spark and...

Good effort :) Looks good

Hello. Would possibly be interested in the propshaft. Could you let me know some more details please? Is it a FRC8390? What length is it extended & compressed? ( I will need to get it shortened) Thanks.

Hello, I am interested in the tyres. Do you know the id of the wheels? Cheers, Paul

Try adjusting the screw on the top of the linkage on the offside carb. You can see it on the third picture of:- Difflock :: View topic - Su Carb Id help Directly up from the dish in the centre. Seems to work on mine

Sorry, not a clue. Mine is an S1 (3.5 SUs) with a lunch box full of relays and fuses on the transfer box. Try shorting out the solenoid terminal to see if that fires, if it is working then check it is getting power down the wire.

It never rains.... I had this recently, starter didn't spin, so replaced the blown fuse, still no go. :confused: Learnt how to remove a starter motor, that bit went well, nothing stuck or broke :D Bench test - all fine, so bolt it all back on (in the rain), connect it up and... nothing...

Trucks? Big yellow trucks? With pretty flashing lights? :D Anyway here is my effort As installed in Just finishing rewiring it, so back on the road soon.

Not entirely sure tbh. This is my 1st v8 and am a novice with these things. It did however make it run terribly; not able to rev, with some popping and banging on what was left of the overrun. I have not really finished checking it all out as I am still doing the rewiring, although I just have...

I had similar issues with mine (but no lpg) It was in the end a small piece of paint/plastic lodged in the inlet valve of one float chamber.