Search results

Dont worry, the place is massive, you only really get close to other people when you come into the "parking/pit" area, never seen any multi vehicle accidents ever, seen a rangey roll once, and numerous bikers injure themselves doning what they do best!

Great for hands free, big bad fail in my opinion for ipod use, i'm on my 3rd one in my car now, first thing i didnt like is you can only turn ipod up with the device and its equaliser presets which is sh*te and distortes at levels where my car radio wouldnt, then its forever crashing even after...

Disco 300tdi Just fitted an OPOT (sandwich plate) so i can have a capillary oil temp and pressure gauges, just an after thought, its about an inch or just over deep so the oil filter is an inch or so lower, on full articualtion (3inch lift fitted, standard size bump stops) do you think the...

£400!!! its only £375 for an allisport one, and thats full length, its 345 for standard length 1

I did read somewhere i think it was on the mudplug website Mudplug's Greenlaning Adventures when i was looking for the address that it was only open for a brief period and is now closed again, cant find the page on the site now that said it.

wouldnt be looking for this would you Adresse courrier : « TRAIL DES 5 PILIERS » 151 rue des 5 Piliers 60170 Ribécourt-Dreslincourt http://www.multimap.com/maps/#map=49.49667,2.98828|7|4&bd=useful_information&loc=FR:49.4914:2.97681:15|60170...

Mrs got her take-a-break today, said i should eat half a teaspoon of rice for the rest of my life,,, im gonna ignore that too. I aint gonna give in to the play police or pen pushers Tom's farm is private land, and so is the access to it now, its in the middle of nowhere, theres 1 tiny tiny...

2.1m Height Restriction, Sounds fun though Les Cinq Piliers (The five Pillars) is near the French town of Compeigne

Hypothetically - If you get an exact clone of your disco and park them side by side, you put a 2" suspension lift on one, that one will sit 2 inches higher than the one next to it, then if you were to put tyres on said disco, which have a +4" larger diameter (with trimming etc), then this would...

Depends what rims he is fitting the tyres too So he fits bigger tyres (265/75/16 - just shy of 32 inch) by trimming the body work, and not lifting the suspension (or body)...... so what would happen on articulation? Wouldnt the new bigger wheels/tyres jam in the roofs of the arches? Isn't...

Probably the way you have fitted the flexi arches on the doors, remove em take a bit more off and refit, mine used to catch on my old disco but only on full articulation, never on speed bumps, they were close though to look at, only just get ur fingers in

Yes Sorry, im not redhand but yes anyway

Green/Brown is the permenant feed, green/white & green/red are left and right, no other wires needed, just ign on obviously

If you have bridged them and still gettin nowt, doesn't this "indicate" :p that its not the stalk thats the problem?

Yeah thats what i do and what tom tells people to do, didnt want to put that though incase the play police are reading

see... thats what i thought, and i tried to fit it over the barrel, but theres a small loom and a bulb cable tied around the barrel preventing it from going on all the way, then i cant get the cap on the end that covers the barrel and bulb... and then the cowelling dont fit...

Took the old cream interior out of my disco 1996 300tdi and repacing it with a better looking grey one, fitted the dash back in wired it all up, and noticed this just hanging there (under the ignition area)??? i dont remember removing it, so have no idea where it goes back too, its the only bit...

Large Rubber Car Door Seal Edge Trim, Per Metre on eBay (end time 04-Jul-10 18:01:01 BST)

Square heads, toms just needs to be ran properly, the site isnt illegal its the access to it, if it helps a few of the guys coming with us are firemen Theres no animals to "chase around" Yeah there is always a slim chance u might get hit by an unisured driver (as u may on any public road...

As soon as something is finalised i'll let people know, a few of the lads just organising work commitments then we'll have a definite date for anyone who's interested