Search results

It’s not unknown for peeps to fit clutch plate the wrong way, lots of noises appear from that mistake

Yes if they do their job properly

Perhaps just a poorly manufactured belt, or is this the latest of several?

I remember using two pack araldite years ago, it was never any more problem after that

If the dealer is worth their salt, they won’t release the car back to you “ticking”, it’s a 100+k luxury car ffs

Have you got a straight edge you can test the flatness of that flange with, and the flange on the manifold? Nuts need to be tight, but not monkey tight, or the aluminium can distort. ( but you know that)

Although not 180 degrees out, you can get it wrong so it fires on no.3 when you want it to fire on no.1, but I think you’re capable of overcoming that problem if it arises !

In the photo, the rear door top does look to curve outwards from the join to the top, you might need to take the glass out and give it some abuse !!

Make some tapered washers to sit over the studs

So stylish my dolomite sprint got “rear ended” twice, second time the fan and its spigot went through the radiator, very sad I liked that car !

Put it in 4 th gear and just push/ pull it to line up the timing marks, providing you’re on the flat, ign off naturally

Surely the last photo is a stag rear end ?

Could also be the stop solenoid failed, cam lobes in the hp pump do wear out so it doesn’t pump at high enough pressures to run ( more so running on red, that doesn’t have so many additives)

If you are smelling petrol, there is either a leak or trouble in the float chamber, have you remembered to put a little oil in the damper if it’s an su carburettor?

Ask a few salvage yards what they want for an engine that runs preferably from a rear end smash

Bent con rods are probably favourite

If the body is earthed properly to the chassis and battery, I suspect there is a connection that has been crimped onto insulation rather than bare wire in your circuit

Merry Christmas

They don’t like 12v

Clutch plate fitted wrong way, or splines need a little lube so clutch can release