Search results

no sdd for fl1 :) with sdd we have the VBF files which can be played with. does anyone have an fl2 SD4 around here? :) I want to see which VBF file is used for ecu on sd4s. All I need to do is a full diag scan and query module information.

Sounds like injector/area to me :)

This will: https://www.aliexpress.com/item/32888540638.html New vci with bt However... it's cheaper to go to any garage that has a proper code reader.

Gentlemen, I present you JLR SDD. Took me a few days to install/setup in between the works of my stripped down fl2 engine. Available at https://tinyurl.com/projlr in both virtual machines or iso kits of standalone installations. Check JLR SDD Installation.pdf, covers all details. @Nodge68...

If these are britpart they will explode if you blow harder on them. Or even take them out of the plastic wrap.

Synergy 2 is a piggy back on fuel pump tricking it, it's more like a cheat device. The "old" td4 has enough power, only do it if you really need more power not just for the thrill. I think a remap will do better although I am not a fan of those either.

That is good enough. I personally use this one: https://www.ebay.co.uk/itm/302516889046 The vonhaus one on ebay lasted two usages. And I don't like the metal style that are heavy, difficult to store and carry.

I have a feeling it was taken off for a reason. Otherwise why remove it.

I always use autosmart brisk :) and a good wet vacuum. I've seen worse that those seats, like new now.

well there is a sender unit in the tank, use that to your advantage give it 12v and hook to a pipe in front. Or, under the seat you can remove the sender unit and then have a big nice round hole straight into it.

There's more

I'm in the same boat now.

@Nodge68 here is where the IPC file is put on the machine. @SWalker here is the date set.

BELT !!!

It does indeed

The PDF guide explains very nice you don't have to be a savvy actually please check it out and highlight if something is not clear, I will update the document. Or perhaps I should use pictures...

Hi Everyone. I have made available SDD 139.08 in a vmware vm. All is set, plug and play. https://drive.google.com/drive/folders/1_pSl2qo60JNv39ocdFMRdDQ0lIYrNgwj Detailed installation PDF there.

Check the middle of the V where the thermostat housing is located. That is usually where is pi$$ing coolant from. If it overheated or ran without coolant for a few seconds, head gasket(s) are shot. In regards to only 75K miles... well the low mileage ones are the ones to be avoided cause the...

8 out of 10 cases when it loses coolant and nowhere to be seen it's the EGR cooler. Even more possible when an EGR blank is in place.

Most of the time the culprit for the misfire is the EGR blank. Other times there is no explanation. The engine runs better with EGR blanked is BS. Does not run better with egr blank, but runs better if the egr was kaputt and now blocked.