NNW504660

M

Malamuteracer

Member

Posts

15

• Saturday at 13:50

• #1

Hi everyone,

Need a bit of assistance. I have had to put a new engine and gearbox into my disco 3.

I very stupidly forgot to mark off the connection into the ECU there are 3 connections I am unsure about.

I would be grateful for any assistance. Please see attached picture.

Thanks

 

Attachments

• 
  IMG-20250621-WA0005.jpeg

  210.9 KB · Views: 22

Keith_L

Well-Known Member

Posts

453

Location

Worcestershire, UK

• Saturday at 13:56

• #2

The plugs and connectors look like they are all keyed differently i.e. you shouldn't be able to plug them into the wrong connector.

 

frostythor

Well-Known Member

Posts

636

Location

NEW FOREST

• Saturday at 13:56

• #3

they only fit one way, you cant put the wrong plug in the wrong socket it just wont fit as it the space bars on the side show in your photos

 

M

Malamuteracer

Member

Posts

15

• Saturday at 14:01

• #4

Thanks everyone for your assistance. I just didn't want to do it wrong. Thanks for your help

 

Keith_L

Well-Known Member

Posts

453

Location

Worcestershire, UK

• Saturday at 14:14

• #5

I can understand your nervousness at this stage of the project. Hope it goes well.

 

M

Malamuteracer

Member

Posts

15

• Saturday at 14:16

• #6

Hi Keith,

I am in the final stages now, I just need to connect the fuel lines and the gearbox earth wire. It's been 6 months in the making, just been taking it easy and extremely carefully.


Thanks

 

Spong

Well-Known Member

Full Member

Posts

6,111

Location

Surrey / Hants border

• Saturday at 14:35

• #7

Malamuteracer said:

Hi Keith,

I am in the final stages now, I just need to connect the fuel lines and the gearbox earth wire. It's been 6 months in the making, just been taking it easy and extremely carefully.


Thanks

Click to expand...

I know you're nearly there now, but should you need further help, @tyregeezer pulls D3/4 engines in and out for laughs. The man has no fear....

 

tyregeezer

Well-Known Member

Posts

832

Location

Rural Norfolk

• Sunday at 20:02

• #8

Thanks mate, but more like a sort of madness

 

M

Malamuteracer

Member

Posts

15

• Sunday at 20:09

• #9

Hi mate,

I think I need your assistance. I've tried to connect thr battery in, after 10 seconds the battery started to over heat, steam started to come out the overflow valve on the battery. I was maybe thinking the alternator?

 

S

Shedload

Well-Known Member

Posts

466

Location

Liverpool

• Yesterday at 10:04

• #10

Is this with engine running ?
If yes check that alternator and wiring.
If it is when you first connect battery, it sounds like you have something going to ground.
With battery disconnected use a multi-meter to check for wires going to ground.
Good luck