- Posts
- 6,613
- Location
- North Manchester
Mine frequently over heated when chasing a wiring fault and re calibrating. But agreed it could also be weak.
Range rover td6 airride
- Thread starter oneofakind17
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
oneofakind17
Member
- Posts
- 30
I have been looking a new compressors on Ebay range between 120 and 250 but all of them don't say they will fit the td6 :/
oneofakind17
Member
- Posts
- 30
Is their a way i can upload a video on here
- Posts
- 4,310
- Location
- Near Heathrow.
Get the exact model from the label on the pump. Then call X8R or 4x4-Airseals, and they will tell you what refurb kit to use. Prices range from £20 to £60 depending on whether it a Wabco or hitachi pump.
- Posts
- 6,613
- Location
- North Manchester
No idea how fast it should fill but what pressure did it get up to?
oneofakind17
Member
- Posts
- 30
It got up to 12 somat i was busy playing 
- Posts
- 6,613
- Location
- North Manchester
That should be enough
The compressor is used to supply air pressure to the air suspension reservoir. The ECU monitors the pressure within
the reservoir and, when the engine is running, maintains a pressure of:
13.7 bar (199 lbf/in2), in systems without an external pressure relief valve
11.8 bar (171 lbf/in2), in systems with an external pressure relief valve
The compressor is used to supply air pressure to the air suspension reservoir. The ECU monitors the pressure within
the reservoir and, when the engine is running, maintains a pressure of:
13.7 bar (199 lbf/in2), in systems without an external pressure relief valve
11.8 bar (171 lbf/in2), in systems with an external pressure relief valve
oneofakind17
Member
- Posts
- 30
Yeah said that on thr attachments sent earlier I don't think mine has external pressure relief valve
- Posts
- 4,310
- Location
- Near Heathrow.
playing music ?? Next video delete the music & rotate your phone !!It got up to 12 somat i was busy playing
A new compressor should fill the tank & get the system to normal height in about 4-5mins. If the car is already up at height, then tank should fill faster. if it takes 5-10 mins then pump needs refurb !!
