Recent content by Zed300

Hi many thanks for your reply, I will try that, I have put 12v from drivers side plug, with actuator disconnected and still they don't all lock and unlock, but if I connect each individually they all work both ways, I also have continuity to them all. But what is strange is with any of the...

Hi I understand it perfectly fine thanks, but just need to no where do the pink and orange start from and should there be continuity between them both, when I put my multimeter probs in any of the plugs to each solenoid I get continuity from the end that connects to the motors not from the...

Hi had another look today,all the locks work when power is put to each lock individually,but not when just sent from drivers wiring.Upon further investigation the orange and pink lock/unlock wires seem to both have continuity even if you put one probe in orange and the other in pink on all the...

Will try that and let you no,many thanks

Hi does that look like the original actuator, cheers for the help.

even though it works when earth and 12v applied to the pink & orange it works both ways,and thats all that happens,many thanks for your help.

had it all installed on the car first and same result ,cheers.

Hi many thanks for your reply,i thought the same about the solenoid,also the circuit should open to either pink or orange when moving solenoid and getting nothing from either wire when moving it by hand and 12v supply to brown/pink,so must be duff then,many thanks for your help.

Hi i connected 12v to the brown/pink wire and nothing happens when i lock or unlock,the solenoid works when i put 12v and earth to the pink and orange wires,any ideas much appreciated.

Many thanks for your help.

brilliant will look and try that,many thanks for your help.

Yes that is all i want to do,which wire needs the 12v supply please,many thanks.

Hi many thanks for your reply,i thought i came across a post where someone asked a similiar question about just locking and unlocking all the doors with the key,and you said to just connect 12v to a certain wire and it would work,im confused as to why i cant do that,cheers.

many thanks,i have been reading posts for over a week lol,seen the info on here when i was looking for other info,and now cant find it again lol,many thanks.

i no it can be done,just cant find the post,seen it a while ago,thanks anyway.