Recent content by xr3iturbo

coming lol thanks again

no probs thanks for quick replys will try and get it done this week.

looks like big job will it all just slide back after all disconeced any pointers

but the hard pedal is basicly the fork hitting the bellhousing wont go any further should there be a hole in the back of the housing

Well small reply had a look inside were the fork is and the fork was very close to housing so had a look behind the slave and found a small hole in the bellhouse casing about 8mm dia ,so i got a screw driver and pushed it in and the fork moved foward so i am left thinking that i need to...

what about this escape hatch in the floor LOL

do i hace to strip down ever thing,gear box transfer box etc just had a look at few threds they say abou a hatch in the floor,how do i get to this any help as i have only done work on fwd cars thanks

but still have to strip down all props transfer box etc dont i as for the user name thats my track car 2litre turbo xr3i thanks for the reply s tommy

no way i was hoping it wasnt that it looks like the fork is very close to bell housing so that would give me reson for hard pedal this sound about right dosent it

newbie here so hello every 1 right here goes, 1990 disco 2.5 tdi 1 day jumpted out of clutch was fine then jumpted out and posted letter,jumpted back into car and clutch pedal went to the floor??? so had a look and the dampener unit was leaking so was replaced still no pedal&no pressure...

Hey guys just a nebie joined as i have same prob as above, goit new master cyl,dampener unit and flexi just left with rock solid pedal even tryed taking slave cylinder out box and pushing piston back went back fine lots of air when opend nipple,but then i bled all that through with slave...