Wiper2001's latest activity

So I changed the Crank Sensor tonight and the car is running. No stops or jolts so far. I am too scared to drive it around the block because I don't want to sit there for hours waiting for a recovery van. So just running it on the drive for now...

I changed the fuel filter this evening. It is running OK but I felt the engine stop for a split second and then continued to run. I think the problem is still there. So tomorrow I am going to change the crank sensor.

I think the ejecting fob was another issue. But it seems to be OK now. I think it was the cold weather causing it to not eject. Thanks!

And check the battery negative strap to the car body. It's a good idea to run a second -ve directly back to the starter motor to minimise volt drop.

Hi, no I have a Bosch filter and a sensor that came from UK Auto Sensors. The syphon hasn't arrived yet so just waiting for that. Cheers!

Thanks all for the replies. I fitted a new battery recently, so I went for purchasing a crank sensor and a fuel filter because it has never been changed for years. The parts arrived today so I will be fitting them this weekend unless it is...

https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjN2I_b8dKLAxUHQUEAHVy4GZAQFnoECB0QAQ&url=https%3A%2F%2Fwww.landyzone.co.uk%2Fland-rover%2Freduced-engine-performance.170165%2F&usg=AOvVaw0CG4_Kv2U123bf0OlAJ...

Check that the battery is fully charged first, and then after that maybe fuel, when was the fuel filter last changed, when you say would not turn over at all, it's not even cranking ? if so that could be the starter, but check battery 1st

I have a 2009 Freelander HSE 2.2 Deisel. I have been using it for the past 2 days with no problems. This morning, I was sitting in the car with the engine running and just entering an address into the Satvav. I just got ready to drive away and...