Recent content by Wilf g

Hi I have used the cheap one and it been fine for at least 3 years

Td5 sorry

Hi Just a quick one has anybody done the core plug behind alternator/engine mount got a drip from mine ,and how hard a job is it,and does anybody know the size please

I only had 1.2 bar with connected direct to high pressure pipe

Update up and running loads of smoke at first starting now cleared turned of and restarted under own power no leads,I'll try it again in the morning fingers crossed it will start. Many thank for all the help cheers wilf

Hi still not got fuel pressure I have got 15.4 mv across f10 and 11.45v at pump when pump running but still only getting 1.2 bar at temp sensor any ideas this is the 3rd pump tried

Cheers have just checked again and got 13mv 11.7v pump running 1.8 bar.

Hi just checked with charged battery getting 12.6 mv across fuse .battery 12.46v across terminals,only getting 11.13at pump plug when pump running ,12.32 when not running

OK I'll double check in the morning when battery fully charged and get back

So if I am getting this if the hp was working the reading would be 23mv across fuse so suspect pump Doa

Yeah pipes are on in right order and pump is new after market

Hi Reading at fuse 11.3 so not good I have run the battery low so on charge again. but I put a 12v supply and earth to the pump and still only low pressure 1.8 bar

Hi Reading at fuse 11.3 so not good I have run the battery low so on charge again. but I put a 12v supply and earth to the pump and still only low pressure 1.8 bar

I have also put the gauge on the hp supply to the engine and only getting 1.2 bar